cdr data

... Module The CG9812 is a large-capacity charging gateway developed by Huawei. It is located between the NE that generates and the BS and im...

..., center interconnection, etc.). Its core function is to extract clock signals from high-speed streams to ensure that the receiving end c...

... SDH Clock and Recovery () Specifications:IC CLOCK/ RECOVERY 32-LFCSP ADN2817ACPZ Category Integrated Circuits (ICs) 　 Clock/Timing - A...

... Product Overview The Optical Transceiver Module CC-QRR110M-SD is a high-performance QSFP56 form factor transceiver designed for 200G Ethernet a...

... for Ethernet Description Gigaopto’s QSFP28 100G eLR4 transceiver part number GTQ-NL3B4-20DC is designed for use in 100 Gigabit Ethernet links o...

Lightning cable, MFi certified iPhone usb cable, Lightning to USB A cable for iPhone Xs/XS Max/XR/X / 8/8 Plus / 7/7 Plus, iPod and iPad Product Descr...

... Clock and Recovery () IC that reshapes and reduces the jitter of each electrical signal. Subsequently, each of 4 EML laser driver IC's con...

... DDM Description Miray's SFP-10GB-ER SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. The mo...

.... ● 8 channels full-duplex transceiver modules ● Transmission rate up to 53Gbps per channel ● 8x53Gbps PAM4 transmitter and PAM4 receiver ● 8 ...

..., etc. Product Features Supports 103.125Gb/s aggregate bit rate 850nm VCSEL laser and PIN photo-detector Internal circuits on both receiver and...

... Center Networks ▪ CPRI/eCPRI 5G Fronthaul Networks Features ▪ Hot-pluggable SFP28 form factor ▪ Full-duplex transceiver modules ▪ Cooled DWDM ...

.../s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock...

... Rate 100Mbps PHY Line Side Interface No JTAG Support No Integrated No Standard Supported IEEE 802.3u|IEEE 802.3|100BASE-TX|100BASE-FX|10BA...

... channel Clock and Recovery () IC that reshapes and reduces the jitter of each electrical signal. Subsequently, EML laser driver IC convert...

...optical rate up to 112Gbps 3. CFP2 MSA compliant 4. Compliant to IEEE 802.3ba specification for 100GBASE-LR4 5. Compliant to OTU4 6. Transmiss...

...Number of Channels per Chip 1 Maximum Rate 100Mbps PHY Line Side Interface No JTAG Support No Integrated No Standard Supported IEEE 802.3u...

... optical connector ► Built-in digital diagnostic functions Technical Indexes Parameter Symbol Min Typ Max Unit Note Rate per Channel - 10.3125...

... MSA standard CWDM DFB laser and PIN photo-detector Internal on both Transmitter and Receiver channel Compliant with CPRI/eCPRI specifications ...

...Version 2.4 · 4 channels full-duplex transceiver · Internal circuits on both receiver and transmitter channels · Transmission rate up to 2...