astm a105n butt welding flanges

ANSI B16.5 WN RF Class 150 Carbon Steel Neck Raised Face Product Information Product Name ANSI B16.5 WN RF Class 150...

... Inconel 625 ASME-ANSI B16.5 1/2’’-60’’ Specifications 1. Hastelloy Steel AB564 , Hastelloy Steel C276/ ...

... with the pipe. The is not easy to deform, has good sealing and is widely used. It has corresponding rigidity and elasticity requ...

... ASME B16.5/ B381 S=10S Available Types: slip on neck threaded plain blin...

Carbon Steel Neck 300lbs ing Neck Carbon Steel WN Product Description: This kind of is made of steel,a...

... or cylinder. It's a strong, one-piece that seals better than flat . It's suitable for high-pressure, temperature, or strict sea...

A234 WPB SEAMLESS ELBOWS CARBON STEEL PIPE FITTINGS Pipe fitting is plays a connection Pipe system, control, diversion, shunt, seal, su...

..." (Except Blind 2500lb 1/2"-12") SW 150#-1500# 1/2"-3" (Except 1500# 1/2"-2 1/2") Threaded 150#-900# 1/2"-24" 1500# 2500# 1/2"-2 1/2"...

... Large Diameter DN60 DN300 DN400 Neck Product Description Standard ASME/ANSI B16.9/16.28 Size 1/2’’~48’’(Seamles...

...h connection and disassembly in piping systems. It consists of two key components: the stub end itself, which is a short pipe section with a flared...

... or cylinder. It's a strong, one-piece that seals better than flat . It's suitable for high-pressure, temperature, or strict sea...

Fittings 234 Pipe Reducer ASME B16.9 A234 fittings are used in pressure piping and vessel fabrication se...

... , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etc Size 1/2" to 48" Sch 5S to XXS Standard A403, A815 etc . Proce...

... // Slip on // Threaded , Socket // Blind // Orifice // Lap Joint // Ring Joint Flan...

... EN BS Fittings Elbow Reducer Tube End Caps Standard: / ASME SB 111 / 466/ A403 Grade: UNS NO. C 10100, 10200, 10300, 10800...

... Tailor-made Neck WNRF Nickel alloy are specialized pipe fittings designed for use in demanding industr...

... due to the lax closure of the cut-off valve. Blind plate should be set in the required isolation, such as the equipment nozzle, before and after t...

... size 4'' ~96'' Class B 86 PSI and CLASS D 175~150psi 1. Carbon Steel A694 F42 F46 F48 F50 F52 F56 F60 F65 F70; A105 A36 , A...

... . Every we export around 4M usd of duplex and suer duplex fitting and for more than 30 countries . Pipe & Pipe Fittings Pipe in Dupl...

ASTM Forged Butt Welding Carbon Steel Pipe Fitting schedule 80 schedule 40 Description: Carbon Steel Pipe Fitting 90 Degree Elbow 45 Degree Elbow A234...