accuracy test of current transformer

... in new or already existing networks. Thanks to its split core they may be installed without opening any cable or bus bar circuit. range of split c...

High Clamp On CT 0.1A~2000A Split Core Clamp On Type The HM-CTC1535 is a high performance AC clamp on...

... High CT, 5-3000A input SCTK662 series of split-core offers 0V-10V and 0mA-500mA at secondary from ...

... Ct Meter Φ0.5 For Ev Charger 1.Main Features: ● Max Measurement Range to 80A ● High Up to 0.1 Class ● With DC ...

on Site Error CT Live Calibration Bench The device is developed with high-end technology, large-scale electronic circ...

... With CE ISO Certification and High Accurancy Features: • High class ,wide linearity • Has been specially designed to f...

... Equipment Error Tester on Site Product Description RS025-L field error tester adopts a recurrence m...

..., 1A Working Range 1-120% or up to 200% Rated Impedance (Ω) COSφ= 0.8 0.1；0.15；0.2；0.3；0.4；；0.6；1.0；1.2; 1.6; 2.4; 3.2 COSφ= 1.0 0.1；0.15；0...

... Set Analyzer Discription of CT Set Complete measurement function, it can all type for second...

600/5 High Accuracy Class 10P10 Cast Epoxy Resin Zero Sequence CT GFLXZK0656-Φ200 Zero Sequence CT,the performances of the products meet standards IEC...

...6kA Mainly using for: Clamp-on Clip on clamp Technial index notes T...

... wide range 200A high KE6322-200 Isolation transformer KE6322-200 is a two phase Isolation tran...

...: FS＜5 ● Maximum system voltage: 720V AC ● voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal : Ith=40~60In ● ...

... Indoor Bushing 1. Main technical parameter Rated primary : 50-1500A Rated secondary : 5A or 1...

... and PT Potential Equipment is used to measure all kinds of and voltage . It can ...

... Set Model: CTP-200P The Portable Set CTP-200P is designed to automatically measure the related pa...

... products meet the standards IEC60044-1, IEC61869-2 and ANSI/IEEE C57.13. 2. Specification Type Rated ratio(A) Classes comb...

... error and phase displacement of . Standard: IEC 61869-2 Instrument - Part 2: Additional requirements for current ...