Add to Cart
No. | Each Part Of The Line | Quantity | Function And Usage |
1. | 5 Ton Uncoiler / Decoiler | 1 set | Hold the steel coils and unwind the coils |
2. | Ridge Cap Cold Roll Former | 1 set | Roll form the material into required profile |
3. | Punching and Cutting Device | 1 set | Punch ribs on formed ridge cap and cut to desired length |
4. | Run Out Table | 2 sets | Support ridge cap when it exits the machine |
5. | Electric Control Cabinet | 1 set | Highly automatic with PLC control system |
6. | Hydraulic Station | 1 set | Hydraulically powered for punching and cutting |
Manual decoiler | |
Capacity | 5ton |
Feeding width | MAX 1300mm |
Expanding range | 460-520mm |
Main motor power | 4kw |
Drive | 1'' single chain |
Type: | Wall board |
Main shaft dia | ¢70mm |
material | 45# forge steel and quenched |
Roller material | 45# high grade forge steel ,chrome coated 0.05mm |
Roll station | 16 groups |
Raw material | 0.3-0.8mm |
Coil width | 400mm |
Working speed | 10m--15m/min(Exclude cutting time) |
Length Tolerance | ±1.5mm |
Weight of machine | About 3 ton |
Size of machine | About 3500×500×700mm L x W x H |
Color of machine | Yellow and Blue |
Coder | Omron, made in Japan |
Control | PLC Panasonic, made in Japan. 380V 50HZ,3phase (Also depend on client) |
Computer operating panel | touching screen |
Other electrical element | Schneider |
Cutting | Hydraulic cutting. Auto cutting when reach the set length |
Hydraulic power | 4KW |
Blade material | Cr12mov,quenched 58°-62° |
Working pressure | 16mpa |
Cutting tolerance | +/- 1.0mm |
No. | Product Name | QTY |
1 | 5T Manual decoiler | 1 |
2 | Half Circle Ridge Cap Roof Roll Forming Machine (Includes Hydraulic cutting, PLC computer, Electrical cabinet, Hydraulic system) | 1 |
3 | Passive Output table | 2 |
Sum | 4 |