Custom TN Glass TIC33 Segment LCD Display With Metal Pins Connection
Brand Name:TSD
Model Number:TSG093B-F-T
Minimum Order Quantity:Negotiable
Delivery Time:7~35 days
Payment Terms:T/T, Paypal
Place of Origin:Guangdong, China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
606-607, Bld 3A,Hecheng Shiji, Wuhe metro station, Bantian, Longgang, Shenzhen, China
Supplier`s last login times:
within 40 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Description of Segment LCD display
TSG093B-F-T is Segment lcd display, TN display, with 6 pins metal pins connection. This segment lcd display is widely using in meter market, especially for Russia market. Except for this segment lcd display, we also have other models with different shapes, different pins. And we could also make the customization with your requirement.
Custom Process as belows:
Confirm specific requirements → pay tooling charge → Provide drawing → confirm drawing → make tooling & samples → Samples finished → Delivery via freight or sea collect
Specification of Segment LCD display
| LCD type | segment LCD display |
| Part No. | TSG093B-F-T |
| Display type | TN, reflective, postive |
| Outline dimension | 37x14.8x2.85mm |
| Viewing Area | 34x5.5mm |
| Number of pins | 6 |
| Connector | COG/PINS |
| Viewing angle | 12 o'clock |
| Operating temperature | -20℃ to +70℃ |
| Storage temperature | -30℃ to +80℃ |
Functional Description of Segment LCD display
The ML1001 is a static LCD COG (chip on glass) driver which can
drive upto 40 segments or cascaded with two or three ML1001s to
drive 80 & 120 segments. There is a shift register for serially
shifting in the data and a data register to store the data that is
going to be displayed. The display data is read into the shift
register serially through the DIN pin at the rising edge of the
DCLK signal. The display data will then be displayed at the rising
edge of the LOAD signal. The display data in the shift register is
output by the DOUT pin after 40 rising edges of the DCLK signal The
display data should be input in the sequence of SEG40, SEG39...
SEG2, SEG1 for proper display of data.
Power on reset
At Power on the ML1001 resets to a starting condition as follows:
1. The shift register outputs are set to GND.
2. The data register outputs are set to GND, hence all LCD segments
off.
Advantage of Segment LCD display
Team source display have the ability to make the customization of all kinds of lcd module including segment lcd display basing on your details requirement, below is the list for your reference. We would be happy to help and provide the reliable solution for your project. Any custom design are welcome.
Custom TN Glass TIC33 Segment LCD Display With Metal Pins Connection
Inquiry Cart
0