Add to Cart
Wedge wire screen filter mesh Johnsons screen filter pipe SS304 316L
wedge wire screens, v shaped wire welded stainless steel water well screens, low carbon galvanized water well screen, Johnson screen tube, johnson screen pipe, johnson well screen, johnson wire screen, johnson filter screen, johnson v wire screens,v wire slot tube, wire wrapped screen pipe, oil well screens, dewatering well screen, perfect roundness screen tube, profile wire screen pipe, reverse rolled screen tube, spiral screen tube, screen cylinders, rod based continous slot screens, sand conrol well screen, wire wound screen pipe, stainless steel filter elements, wedge wire roll screen, stainless steel strainer pipe, rotary drum screen, wedge wire rolling screen, reversed constrction wedge wire screen, reversed profile wire screen,
cylindrical screen for inside to outside filtration
1. Axial wire construction: produces vertical slots which allow beds of media to move up and down without abrading the individual grains.
2. internal circumferential wire construction: uses external support rods to creat an unobstructed internal screen face.
3. internal axial wire construction: creates long, parallel slots, in vertical applications, media can move up and down with abrading. in horizontal rotating applications, flow moves across the wire edges for efficient dewatering.
4. inverted wire construction: external circumferential inverted wire and axial internal support rods
Wedge wire screen is widely used throughout the world for water,
oil & gas wells, and is the dominant screen type used in the water
well industry.
The welded stainless steel wire wrap screen is made up of rods and
profile wire. The rod can be round wire, triangular wire or
trapezoid wire. The profile wire is triangular wire (V-shaped
wire). This type of wire wrap screen has a structure and high open
area, as well as accurate slot dimension. The wire is attached to
the rods by welding, producing rigid one-piece units having high
strength characteristics at minimum weights. Slot opening for
screens are manufactured by spacing successive turns of the outer
wire to produce the desired slot size. All slots should be clean
and free of burrs and cuttings. Each slot opening between adjacent
wires is V-shaped, from the special shape of wire used to form the
screen surface.
Gap (mm): 0.02, 0.025, 0.03, 0.04, 0.05, 0.06, 0.08, 0.10, 0.15,
0.2, 0.25, 0.30-35, can also be made according to customer
requirements
Material: low carbon steel, low carbon steel galvanized, plastic
sprayed, stainless steel (304, 316L, Hastelloy, etc.)
Length: 50mm--6000mm
Outer diameter: 25mm--600mm
Connection form: groove connection or threaded connection, direct
pipe head or threaded pipe head
Screen wire specifications: conventionally 0.75*1.5mm, 1*2mm,
2*3mm, 2.3*3mm, 3*5mm
Internal ribs: DN25mm/12, DN33mm/8, DN37mm/8, DN40mm/10, DN60mm/12,
etc.
1. The application of trapezoidal wire forms a V-shaped opening
between the Schroder screen gaps. This design form works more
efficiently than other forms of products, ensuring the smoothness
of water filtration.
2. The continuous winding of the trapezoidal wire forms a
continuous high-density uniform gap on the supporting wires
arranged in a circular pattern, which ensures the opening area and
non-blocking of the Schroeder screen, and avoids the high-density
accumulation of sediments. Productivity and extended filter life
are guaranteed.
3. The winding wire and all supporting wires are connected by
electric welding, which is durable and has a longer working life
cycle.
4. The longitudinal arrangement of the support wires and the
continuous slot form of the screen are designed according to the
actual needs, so that the product has higher compressive
performance.
1. V-Shaped Slots —Openings shaped like a "v" that open toward the
inside of the well tend to allow the particles that are justbarely
smaller than the width of the slot pass. In other shapes of
openings, these particles would get caught in the screenand clog
it.
2. Very Large Open Area — This design gives continuous slot and
hence the open area for water to enter is more than 2 timesthat of
conventional slotted pipes of any size and slot opening. This
allows more water to enter at much lesser frictionalhead loss and
the efficiency of tube well is improved appreciably.
From inside to outside. Wire, Inside; Support rod, Outside.
1. Wire is the length of the screen pipe;
2. Support rod is the length of the screen pipe.
The cross-section of the screen strip is trapezoidal, the slots at lower part is wider than that of upper part of the screen.
The difference between different material of water well screen pipes
Type of water well screen | |||
Stainless steel | Galvanized | Silver Painted | |
weight | Stainless steel>Galvanized>Silver Painted | ||
Surface treatment | Electrolytic polishing Pickling and polishing | Uniform Galvanized surface | Uneven Silver Painted surface |
Corrosion resistance | powerful | medium | slightly weaker |
Tensile Strength | powerful | medium | slightly weaker |
Collapse Strength | powerful | medium | slightly weaker |
Magnetic | SS201 SS205 SS205B no magnetic Other micromagnetic | magnetic | magnetic |
service life | Stainless steel>Galvanized>Silver Painted | ||
price | high | low | lower |
water well & Oil well
water supply systems
Filter equipment
Drum Filter
Sand control
Groundwater
Pump Filter
Motor Filter
Dewatering
Groundwater
Waste Water Treatment
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Xinlu Wedge Wire Screen Pipe Details
Xinlu Wedge Wire Screens Package
Plastic bubble bag packaging
Transparent plastic bag inside, woven bag outside
Wooden box
Pallet
Product Tags: wedge wire screen pipe ss 304 ; welded cylindrical wedge wire screen pipe ; wedge wire filter screen ss 304