Add to Cart
Part I Product and Company Identification
polymide tape |
IH852 E1-IH803 produced at SHENZHEN KHJ TECHNOLOGY CO. LTD is named and located at KHJ industrial Park Building 1 Chuangxin Industrial Park of Xintian district.
Community Guanlan of Longhua New District in Shenzhen China) can
contact (86)755- 28102935 in order to identify data regarding its
composition (CAS #, Content (%) of silicone adhesive trade secret,
Pi No's from 73 to 75 and Others being no higher than 1.5 for
further safety considerations and hazards assessment purposes. -
Hazard Class & Summarizing- Non Dangerous Article.
Invasion Methods: Inhalation,Ingestion and Eye/skin Touch Whilst
Proper use and storage will not generate toxic gases that emit
unpleasant odors when inhaled; any chemical gas released from
burning should be immediately exhaled, otherwise seek medical
advice if feeling sickly.
Eye/skin contact : Clean the area thoroughly using soapy water
before laundering contaminated clothing or taking other steps such
as removal and laundering; seek medical assistance immediately if
irritation develops or persists; for ingestion use an emetic and
contact a medical provider immediately ; no environmental risks
occur
Eye/Skin Touch:No Effect Absorption :Product is Solid
Ingestion :Retort with Emetic Inducement immediately and see your
physician immediately (Emetics may result). Doctor Notes :Doesn't
Require Special Protection.
Harmful Combustion Products Carbons :Monoxide and Carbon Dioxide.
Fire Extinguishing Agent :Dry Powder/carbon Dioxide Foam. Burning
Touch Damage:None unusual fire/explosion hazards were detected;
Protection equipment:Wearing Full Bunker Gear with SCBA for
protection purposes was required for safe operations.
Part 6 - Leakage Emergency Treatment/ Solutionssolid, without leakage
Part 7 : How to operate and store
Avoid skin contact with hot objects when possible and store in dry,
shaded environments to minimize sun glare.
Maximum Allowable Concentrations for Solid Products are
Nonapplicable
Respiratory System Protection does not need special protection; Eye
and Body protection do not necessitate special precaution. In any
other regard no special safeguarding measures need to be put in
place either
Physicochemical Features
Properties: | Solid roll material |
Color: | Amber |
Smell : No special smell | |
PH Value: | Not Application |
Melting Point (C): | Not Application |
Boiling Point (C): | Not Application |
Autoignition property : Not Application | |
Flash Point (C): | Not Application |
Ignite Temperature (C): Not Application | |
Explode Limit: | Not Application |
Dissolubility: | Not Application |
Other Physicochemical Features : No Special Notice |
Part 10 Stability and Reactivity, for the purposes of Part 11 is as follows. Assume stability : Stable; Conditions to Avoid are:Open fire, high temperature environments that easily cause burning; Aggregation Hazard is Non; Decay Products are Carbon Monoxide/Carbon Dioxide emissions.
Part 11 Toxicology Data Toxin Level = N/A Sensitization =N/A
Carcinogenicity =N/APart 12 Ecology Data Toxicity Level is Non
Available
Biodegradation Property = Non Availabable Organism Accumulate
Property= - Non Biodegradation property= No data available
Waste Property : Natural degradation WTP Methodology : Dispose in accordance with Federal, state and provincial regulations
Part 14 Transport Information. A non hazardous product would fall within Class of Risk; No Dangerous Goods Data Available and Packing Mark not present, therefore not needing special packaging methods or methods of shipment.
Applicative Rule: ISO14001