Add to Cart
Rose Gold 5*8MM SS201 Bending Stainless Steel Rectangular Pipe Structural 150MM
Properties of Stainless Steel
Stainless steel has different corrosion properties which include being non-corrosive, rust-resistant steel, which is simply designated as stainless steel. In comparison with aluminium, stainless steel is approximately 3 times heavier.
Stainless steel, like steel itself, is an alloy. An alloy always consists of different materials. Among the most frequent alloying elements in non-corrosive stainless steel is chrome, where nickel, molybdenum and further elements are used for special requirements.
The magnetisability, as well as the corrosion resistance, are two of these requirements which are controlled by the different alloys.
Uses and properties
Steel with a chromium content of more than 10.5%, as well as various other elements in smaller quantities, is considered to be stainless. In combination with oxygen chromium forms a thin, sealed, fixed-adhering, chromic-oxide layer – the so-called passive layer. It is exactly this passive layer which is responsible for the resistance of the material. Due to its corrosion resistance, the metal is used for example for washing drums.
Rust-resistant stainless steel can be very well compared to anodised aluminum with regard to its properties. If the exterior skin of the material is impaired, the material and its surface mostly suffer damage.
Stainless Steel Rectangular Pipe Specification
Product Name | Rose Gold 5*8MM SS201 Bending Stainless Steel Rectangular Pipe Structural 150MM |
Standard | AISI,ASTM, EN, BS, GB, DIN, JIS |
Length | 1500mm |
Width | 5mm |
Height | 8mm |
Thickness | 0.3mm |
Dia Tolerance | H9 / H11 / H13 ,or requirement |
Materials | 201 |
Surface | Bright, pickling ,polishing,annealing,etc |
Inspection | ISO,BV,SGS,MTC |
Packing | Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit forall kinds of transport,or
as required |
Supply Ability | 1000 metric tons/month |
MOQ | 5 metric ton,sample order accepted |
Shipment time | Within 7-10 workdays after receiving deposit or L/C |
Payments | T/T,LC |
Stainless Steel Pipe Chemical Component( %)
Grade ASTM | C | Si | Mn | S | P | Cr | Ni |
201 | ≤0.15 | ≤0.75 | 5.50-7.50 | ≤0.030 | ≤0.060 | 16.00-18.00 | 3.50-5.50 |
304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.035 | 17.00-19.00 | 8.00-11.00 |