Industrial IP65 Distribution Box Concealed Installation

Industrial IP65 Power Distribution Box Concealed Installation Electrical Distribution Cabinet​


Product Overview:

Lighting distribution box equipment is responsible for the control, protection, conversion and distribution of electrical energy at the end of the low-voltage power supply system. It is mainly composed of wire, components (including disconnecting switch, circuit breaker etc.) and box body.

Product parameters:
(1) Rated operatinal voltage
① Main circuit: 220,380 V
(2) Rated current
① Rated current :40~125A

Normoal service condition

(1) The ambient air temperature ≤ +40℃ and its average temperature ≤+35℃ within 24 h. The lower limit of ambient air temperature is -5℃.
(2) Atmospheric conditions: the air is clean and the relative humidity ≤50% when the temperature is +40℃. At lower temperatures, greater relative humidity is allowed. For example, the relative humidity at +20 ° C is 90%. However, consideration should be given to the possibility of occasional moderate condensation due to temperature changes.
(3) Altitude ≤2000 m.
(4) Pollution level 3.


Technical conditions
1) Normal use conditions
(1) The ambient air temperature ≤+40℃ and its average temperature ≤+35℃ within 24 h. The lower limit of ambient air temperature is -5℃.
(2) Atmospheric conditions: clean air, at the highest temperature of +40℃, the relative humidity≤ 50%. At lower temperatures, greater relative humidity is allowed. For example, the relative humidity at +20 ° C is 90%. However, consideration should be given to the possibility of occasional moderate condensation due to temperature changes.
(3) The altitude≤2000 m.
(4) Pollution level 3.
2) Electrical parameters
(1) Rated operating voltage
① Main circuit: 220,380 V.
(2) Rated current
①Rated current :40~125A

3) Frame structure
(1) The Cabinet frame of the equipment can be welded or connected by screw assembly. The cabinet frame and housing shall be of sufficient mechanical strength and stiffness to withstand mechanical and thermal stresses arising from the installation of components and short circuits and shall be considered to prevent the formation of magnetic paths that can cause large eddy current losses. At the same time, the performance of the equipment will not be affected by the lifting and transportation of the equipment. To ensure corrosion resistance, the equipment should be made of corrosion resistant materials or coated with corrosion resistant coating on exposed surfaces and the conditions of use and maintenance should also be considered.


Dark outfit:

Product features:
1. Transparent visible clamshell, IP30 protection level, effectively prevent foreign bodies from entering, waterproof and dustproof
2. Strict selection of materials, reliable quality, fire retardant, reject inferior quality
3. Wiring knock down holes, upper and lower sides of each knock down holes, into the wall thickness meets the wall required, strong and not easy to fall
4. High purity zero line discharge, improve conductivity, electrical characteristics, safe heat dissipation
5. Humanized removable baffle, reserved space


Meticulous detail/fine workmanship, excellence

● Adjustable bracket
Flexible adjustment of box bottom embedded error easily adjust the level and depth
● Built-in level
Check whether the container installation positions are aligned
● ABS flame retardant material
Safety, environmental protection, fire retardant and durable
● Accessories are complete
Direct one station to save customer time

Installation tips

1. The installation of the power distribution cabinet should be installed in accordance with the manufacturer's frame size diagram.
2. After the installation of the product, should be checked and tested before it can be put into use.


Order conditions
When ordering products, the following documents shall be provided:
1) Primary system diagram.
2) Layout diagram of the PDC.
3) List of equipment in each cabinet (including model, specification and quantity).
4) Special requirements inconsistent with normal use conditions.