Hot Rolled Stainless Steel Flat Bar 201 304l 316 316l 321 304 Flat
Steel Made In China
We can provide a variety of surfaces and sizes, if you want more
details, please contact us!
Type | Stainless Steel Flat Bar |
Standard | 201 304 316 316L 310S 430 |
Surface | 2D, 2B, NO.3, NO.4, HL, 6K, 8K |
Package | Standard seaworthy package, or as required |
Length | 3000-12000mm or as customer's requirements |
width | 12-300mm or as customer's requirements |
Markets | America, Asia, Africa, Europe, etc. |
Payment Term | T/T(30% for deposit) |
Shipment | By sea, by air, by express |
Application | Construction field, Shipbuilding industry, Petroleum and Chemical
industry, Electricity industry, Food processing and Medical
industry, etc. |
◆ Chemical Composition(%)
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and
the copper ontent is lower than J4. Its processing performance is
less thanJ4. It is suitable for ordinary shallow drawing and deep
drawing products, such as decorative board, sanitary products,
sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good,
because the hardness is high (both above 96°) and the polishing is
morebeautiful, but the square tube or the curved tube (90°) is
prone to bursting.
In terms of flat plate: due to the high hardness, the board surface
is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the
bending problem, the bend is easy to break, and the groove is easy
to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing
can be done on the decorative panel, but it is not possible with a
little difficulty. There is feedback that the shearing plate is
bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with
inner seam). The sink material has been tried to bend, 90 degrees,
but it will not continue.
J4( High Copper): It is the higher end of the J series. It is
suitable for small angle types of deep drawing products. Most of
the products that require deep salt picking and salt spray test
will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make
equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the
inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric
corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent
work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid,
fertilizer and other production equipment; photographs, food
industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable
ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It
is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher
temperatures, but it is easily machined, bent, and formed.
FAQ
Q1. Where is your factory ?
A1: Our company’s processing center is located in Wuxi, China.
Which is well equipped with kinds of machines, such as laser
cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to
the customers’needs.
Q2. What are your company's main products ?
A2: Our main products are stainless steel plate/sheet, coil,
round/square pipe, bar, channel, etc.
Q3. How do you control quality ?
A3: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q4. What are the advantages of your company ?
A4: We have many professionals, technical personnel, more
competitive prices and best after-dales service than other
stainless steel companies.
Q5. How many coutries you already exported ?
A5: Exported to more than 50 countries mainly from America, Russia,
UK, Kuwait, Egypt,Turkey, Jordan, India, etc.
Q6. Can you provide sample ?
A6: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days.