Pedestrian Swing Turnstile Gate 304 Stainless Steel Cabinet With Face Recognition

Pedestrian passage swing gate face recognition gate area gym use

1. Main functions and features
1) It has the functions of fault self-checking and alarm prompting, which is convenient for users to maintain and use;
2) Through the built-in small button on the main control board, the running status of the programmable device;
3) The mechanical structure has anti-pinch and anti-collision functions. When the swing arm encounters resistance during the reset process, the motor automatically stops working within a specified time, and resets again after the default delay (until reset), and the force is very small ( ≤2Kg);
4) Anti-shock function, the swing arm is automatically locked when no signal of opening the gate is received;
5) Swing arm synchronization function (for double pendulum, split case);
6) It has an automatic reset function. After the gate is opened, if there is no passage within the specified time, the system will automatically cancel the user's permission to pass this time;
7) Normally open or normally closed can be adjusted to meet the requirements of different venues;
8) Induction or delay automatic reset, the standard is 5 seconds after opening (adjustable) automatic reset;
9) The swing arm automatically swings open when power off, and automatically closes when powered on, which meets fire protection requirements
2. Technical parameters:
1.1 Construction: 304 gauge/2.0 and 1.0 stainless steel housing
1.2 Dimensions: length 1400*width 300*height 1000mm
1.3 Weight: 40Kg-60Kg
1.4 Swing arm length: 600mm-1200mm (can be used alone or in pairs, it is recommended to choose guardrail)
1.5 Swing arm bearing capacity: 30Kg
1.6 Swing arm transmission angle: 180 degrees
1.7 Swing direction: bidirectional
1.8 Working power supply: AC220 ±10%V/50 ±10%HZ
1.9 Drive motor: DC brush motor (24V)
1.10 Input interface: dry contact signal or 12V level signal or 12V pulse signal with pulse width ≥100ms, drive current ≥10mA
1.11 Communication interface: RS485 standard communication distance ≤ 1200 meters
1.12 Traffic speed: 40 people/min (normally open), 25-30 people/min (normally closed)
1.13 Gate opening and closing time: 1-2 seconds
1.14 Time required to enter the traffic state after power on: 3 seconds
1.15 Automatic reset time after failure: 10 seconds
1.16 Working environment:
◇ Indoor, outdoor (shade)
◇ Temperature: -10℃—— 50℃
◇ Relative humidity: ≤90%, non-condensing 3. Main structure and configuration
◇ Main column 1
◇ 1 swing arm
◇ Control board 1 set
◇ Switching power supply 1
◇ Motor 1
◇ 1 set of movement and transmission part

Technical parameter:

Main Functions:

1.Only authorized personnel can pass, and an audible and visual alarm will be issued when unauthorized personnel break in.

2.Always open and always closed modes can be flexibly selected, and two-way passing can be used. The opening and closing speed of the door wing can also be set according to the flow of people to improve the efficiency of the equipment.

3.Anti-following tracking control technology, strictly preventing unauthorized personnel from passing through.

4.Anti-pinch function, when the swing arm is in the process of resetting, it will automatically rebound or the motor will automatically stop working within the specified time, and the sound and light alarm will be issued at the same time.

5.Anti-shock function, when the door opening signal is not received, the swing arm is automatically locked, and the swing arm can be opened with a maximum impact of 120Nm.

6.With self-detection, self-diagnosis, and automatic alarm functions; including illegal intrusion alarm, anti-pinch alarm, and anti-tailing alarm.

7.Remote control management function.

8.It can be run online or offline.

9.LED passing direction indication, showing passing status.

10.When the power is cut off, the swing arm automatically opens, the passage is in a smooth state, and personnel can pass freely to prevent panic.

11.Automatic reset function: after opening the door, the system will automatically cancel the user's permission for this pass if the user does not pass within the specified time,and you can set the passing time.

The Shenzhen headquarters was established on July 1,2006 and is located in Zhangge Community,Guanlan Street,Longhua

District,Shenzhen.The headquarters factory covers an area of about 20000 square meters.With the continuous expansion and expansion of the domestic and overseas sales market,the company invested 1.55 million USD in 2018 to establish a full-asset industrial park in the Meizhou Comprehensive Bonded Zone,and has a self-built Meizhou Industrial Park with its own property rights.The park covers an area of about 20,000 square meters and a modern industrial plant with a building area of more than 30,000 square meters.

We are a modern security comprehensive national high-tech enterprise integrating R&D,production,sales and service.We are the most professional one-stop supply chain supplier and service provider of parking lot equipment and pedestrian access equipment in China.The company has Passed IS09001 quality management system certification.We have established advanced automated spraying production lines,automated robotic processing production lines,sheet metal processing production lines,machine processing production lines,and equipment assembly production lines.Regarding product debugging,testing,inspection,and factory control as the top priority,an advanced laboratory and aging room have been specially established to provide various functions such as high and low temperature testing,wind shower testing,and seismic testing of accessories and the whole machine.Comprehensive monitoring.While developing hardware sup-
porting facilities,we pay more attention to R&D and the provision of professional talents.The company has a research and development center,and the research and development team has more than 10 years of professional experience in the industry.The subordinate electronic engineering department has independent research and development and production capabilities for product core circuit boards,and has obtained relevant patents.At the same time,it is equipped with a professional service team of nearly 300 people including production center,material control center,marketing center,and financial center to meet the different needs of customers in an all-round way, and escort the quality of products.

We have more than 200 product categories with independent product patents.The main prod- ucts are parking lot management system equipment,integrated barrier gates,high and low speed barriers,straight poles,curved poles,fence barriers,advertising barriers,advertising gates,tripod turnstiles,swing turnstiles,wing turnstiles,sliding turnstiles,full-height turnstiles there are various types of gate movement and supporting various types of entrance and exit ticket boxes,with a monthly production capacity of 10,000 units.We have always been adhering to the business princi- ple of "Quality First,Customer First,Technological Innovation and Strong Enterprise,High Quali- ty Service",and we have been pursuing technological innovation as the driving force and high-effi- ciency quality as the development.After years of solid development,we have provided the market with powerful "pre-sales,concentrated,and future"7x24H all-weather services.Our product sales network has spread all over the country and sold in Southeast Asia,Europe,Latin America and other countries.And region.We always firmly believe that:technological innovation is the future,professional focus is ability,safety and practicality is the guarantee,and win-win cooperation is the pursuit.Integrity management,stability and far-reaching,we strive to create the world's most professional,leading and high-quality security intelligent products!