Product Details
DC Brushless Boom car Park rm Barrier Gate
Product characteristics
1.Innovative electronic clutch design: press the electronic clutch
switch to unlock when
power off, then the boom can be raised up directly.
2. No limit switch design: the motor can detect the boom position
automatically.
3. Bi-direction boom holder design: left-installation and
right-installation can be exchanged easily and quickly.
4.Three springs available can extend the spring service life.
5.Auto-detect barrier close after power-on, open/close speed is
adjustable.
6. With auto-reversing on obstruction function.
7. Infrared photocell interface is available.(need to install
photocell device).
8. Loop detector interface is available, to avoid hitting the
vehicle, and control the boom falling down automatically after
vehicle passing. (need to install loop detector)9. Built-in counting function, can store the times of opening
signal, deduct the times when vehicle passing the loop, boom
falling down after vehicle passing through, well improve the
traffic efficiency.
10. Built-in delay auto-closing function, coordinated with counting
function, if the numbers of vehicle passed less than the stored
numbers, the boom will fall down automatically by countdown, but
will be new countdown if there is up or loop detector signal.
11. Integrated RS485 communication interface,to realize control of
barrier open/close by computer and barrier status query.
12. Integrated RJ45 network interface, to realize control of
barrier of barrier open/close by computer network and barrier
status query.
13.With auto-aging test function.
14.NO/NC wire control signal input are optional.
Technical parameter |
Model | CW228 |
Power supply | AC220V±10%,50Hz |
Working temperature | -25℃~+70℃ |
Environmental humidity | 5%~95% |
Direction | left and right direction |
Length of pole | ≤6m straight pole,≤ 6m curved pole,≤ 5.5m two poles,≤ 4.5m three
poles |
Motor | Capacitor running asynchronous motor |
Rated capacitance | 8uF/450V |
Motor rate | 80W,120W |
Rise and fall time | 1s-3s |
Company Profile
The Shenzhen headquarters was established on July 1, 2006 and is
Located in Shenzhen with production
Workshop and one newly self-built factory in Meizhou city Guangdong
Province cover 50,000 square meters
total . We are a modern security comprehensive national high-tech
enterprise integrating R&D, Production, sales
and services. We are the most professional one-stop supply chain
supplier of parking lot equipment and
pedestrian access equipment in China.
Our company is the largest manufacturer of turnstile/ barrier gates
, it has passed IS09001 2008 quality
management system certificate. Long-term cooperation with over 500
of security system solution companies .
For the Past 16 years we just focused on the domestic market and
manufacture, Now we are developing
overseas market to provide our agents cheaper and quality products
, therefore we need more strength agents
and distributors or security solution companies.
if you want to be the first batch of our agents , contact us
immediately to create benefits together !