Add to Cart
Mechanical FRID Card Access Control 304 Stainless Steel Security
Swing Turnstile Barrier Gate
On-site installation and commissioning of equipment
6.1 On-site installation of equipment
1) Count the accessories according to the packing list
2) Determine the installation location of each gate according to
the specific system composition, use site and the selected model.
3) As shown in the installation requirements as shown in the figure
below, determine the installation hole position, and pre-process 4
M12 anchor bolts or 4 M12 expansion bolts at the installation
position.
4) Put the 3/4" PVC pipes of the strong cables and weak current
cables respectively through them, and bury them in the
corresponding positions with cement.
1.Power supply:AC220V±10%,50±10Hz
2.Input interface: (passive node information number or pulse width)
3.communication interface:switching,RS232 RS485 optional
4.pass direction: one-way or two-way pass
5.working environment:-25℃ to 70℃
6.Relative humidity,≤90% no condensation
7.open/ close time: 1s
8.Power-on system startup time: 3 second
9.Number of passers:40 persons/minute
10.Normal service life: 4 million times
11.Chassis material: standard 304 stainless steel
12.The shape of the chassis can be customized according to
requirements
Indicator | Green means passage |
Power supply for core | AC100~220V 50/60Hz |
Operational voltage | DC 24V ±5% |
Voltage of indicator | DC12V ±5%(standard) |
Power consumption | 30W |
Working environment | Indoors or outdoors(outdoor is optional) |