

Add to Cart
Office building access control system with swing gate for staff passage
The equipment shell is made of 304 stainless steel, which is
laser-cut, bent by a bending machine, and then welded and polished.
It is beautiful in appearance, rust-proof and durable.
The main control board is powered by DC24v, the built-in watchdog
never crashes, and the built-in self-checking program can judge the
running status of the equipment by itself
Infrared sensor, A-level high and low temperature resistance grade,
service life 5 million times, standard socket mode
The swing rod is welded from stainless steel, and then the acrylic
swing door is fixed with clips
Independent research and development and production of self-locking
structure, the switch is automatically locked in place, preventing
personnel from manually pushing open the channel
DC24V permanent magnet motor, suitable for the working form of high
frequency and low working conditions of channel equipment, with a
trouble-free working frequency of 5 million times
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One
direction card reading and another no reading; One direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
control panel.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the Swing barrier
and then take a valid card to be read for passing.
7. Swing barrier is with 485 interface for long-distrance control
concern.
8. Anti-rush function: If there is no open single, arm will be
holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and
mechanical anti-clipping. When passenger is going through the Swing
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Swing barrier is with standard electrical interface for the
integration of various readers and writers.
Channel width | 600mm-1100mm |
Swing arm length outside the chassis | ≤51cm |
Opening speed | 0.5 seconds |
Number of people passing | 40 people/minute |
Working environment | -40°C~80°C |
Relative humidity | ≤90%, no condensation |
Gate opening signal | relay |
Cabinet material | 304 stainless steel |
Box thickness | 1.5mm |
Drive current | >10mA |