

Add to Cart
Rear Air Ride Suspension Air struts For Cadillac Escalade GMC Yukon 2015-2021 22283446
Rear Air Suspension Shocks Absorber For Cadillac Escalade ESV GMC Yukon XL 2015-2021
Rear Air Lift Shock Strut Absorber with Electric replacement for 2015 2016 2017 2018 2019 2020 Chevrolet Tahoe Suburban Cadillac Escalade ESV GMC Yukon XL
Quick Detail
Description | Brand New Air suspension for Cadillac Escalade ESV GMC Yukon XL 2015-2021 Rear |
Model | Air Ride suspension for Cadillac Escalade ESV GMC Yukon XL 2015-2021 |
OEM | Air Struts for Cadillac Escalade ESV GMC Yukon XL 2015-2021 |
Condition | Brand New |
Fitting Position | Rear Left and Right |
Material | Rubber+Steel Aluminum |
Application | Air Shock Absorber for Cadillac Escalade ESV GMC Yukon XL 2015-2021 |
Warranty | 12 months |
Delivery | 3-15days after receiving payment |
Gross Weight | 5KG |
Application:
Car Model:
OEM Number:
22283446 84176675 580-1106 580-1068 23151122 23267007 23290661 23290660
What is an air shock absorber
Other cars have higher control limits and comfort. We use the
airmatic.dc air suspension system equipped on maybach to show the
change in spring. The elastic coefficient of the spring is adjusted
by the flow of the air in the rubber levine. When the short-wave
road or high speed is bent, the portion of the gas chamber is
locked, and the air flow rate is reduced when the leaf cavity is
pressed, so that the spring is hard to reduce the body undulation
and improve the body stability. On ordinary roads, all air can flow
freely, when the lumen is pressurized, the air flow is increased,
thereby providing a soft spring and a maximum degree of travel
comfort. The air in the air suspension of Maybach always maintains
the pressure of 6-10 bar. Air suspension also integrates
traditional chassis lifting techniques into it. When driving at
high speed, the body height is automatically reduced, thereby
increasing the design performance to ensure good high-speed driving
stability while reducing wind resistance and fuel consumption.
Slowly through the bump road, the chassis is automatically elevated
to improve through performance. In addition, the air suspension
system can also automatically keep the body level height,
regardless of the no-load full load, the body height can constantly
constantly, so in any load, the spring stroke of the suspension
system is kept, so that the shock absorber characteristics will not
be substantially affected. Therefore, even if it is full load, the
body is also easy to control. This is indeed a leap in platform
technology. While adopting similar design, the techniques of each
manufacturer are completely different. Benz is the predecessors of
air suspension technology. Its first time to place the rubber
levave in the metal housing, so that the elasticity characteristics
of the skin cavity are close to the replace, and a special fiber
has also been added in the lower chamber, thereby causing the lumen
More robust and longer life. On this basis, AUDI changes the
arrangement direction of the fibers, so that the spring of the
spring is further improved, etc. There are also different
manufacturers in specific indicators of some chassis lifting. For
example, Maybach and Phaton have automatically dropped 1.5cm at the
vehicle speed, and when the vehicle speed dropped back to 70km / h,
the body returned to normal height, and the two speed indicators of
A8 were 120km / h and 100km / h, in the automatic shock absorption
mode and the height of the body below 2.5 cm and 2 cm respectively.
If you encounter a very serious road surface, the chassis of the
three cars can rise by 2.5cm at the normal height. In addition to a
variety of body heights, Phaeton, Maybach and A8 can also select
automatic, comfortable, raising and Sport and other damasters such
as automatic, comfortable, raising and Sport through the car. They
can provide different hardness shock absorbers to meet different
driving needs. Of course, only the air springs and shock absorber
assembrenes do not achieve the above forms, and the cooperation of
a large number of additional components is also required. These
include air compressors, accumulators, control units, front and
rear bridge body height sensors, 3 differential body acceleration
sensors, and four air springs extending acceleration sensors, and
the like. The sensor will transmit the collected signal to the
control unit, and the control unit is calculated to adjust the air
spring hardness and damper damping, thereby achieving the most
ideal elastic state. This seems a very complex process only has
tens of microseconds in the entire system. Therefore, the air
suspension system can make timely and appropriate reactions to each
minute action of the wheel.
Air Spring Features
The two major types of air spring are the rolling lobe (sometimes called reversible sleeve) and the convoluted bellow. The rolling lobe air spring uses a single rubber bladder, which folds inward and rolls outward, depending on how far and in which direction it is moved. The rolling lobe air spring is available with very high usable stroke length—but it is limited in strength because of its tendency to bulge, and therefore, has limited force capacity. The convoluted bellow type air spring uses one to three shorter bellows, with the multiple units being reinforced by a girdle hoop. Convoluted air springs are capable of ten times the force of a rolling lobe version and twice the life cycle rating, but have less usable stroke to work with.
Air Suspension Compressor Working
The air system works by pumping compressed air into air bags or springs made of textile-reinforced rubber via compressed air lines. The air compressor is an electric or engine-driven pump that’s usually attached to the car frame and found under the hood. It draws in outside air, compresses it, and uses the compressed air to fill the air springs to “lift” the vehicle’s chassis from the axle.
Aside from being the main part of an air system, air compressors are also coupled with air tanks in some vehicles. This allows the driver to inflate tires when driving off-road, for example. Air compressors can also be used to re-seat a tire that has slipped off of its rim. Air compressors also have a number of other pneumatic-type applications like maintaining the PSI for air horns, etc.
Air Suspension Compressor
A device that compresses and pressurizes air. Used to inflate air springs.
An Air Suspension Compressor also called Air Compressor or Air Pump, inflates or deflates air spring bags as necessary. When a vehicle with air suspension drops below the factory-defined height, the air suspension compressor, also simply called an air compressor or air pump is activated and inflates the air bags or air struts.
The air compressor requires a space where it can actually stay, and for most setups that are going to end up being the trunk. The air compressor in your trunk means that there is relatively lesser storage space in total.
Air Suspension Real Photo:
FAQ
Q1:What's your advantage?
1. Resonable price ,good service
2. Reliable quality , long working life
3. Quick and safe modes of payment
4. Ships items timely and quickly
5. Best Warranty,easy return
6. Our products are exported to most countries in the world.
Q2:To which places have you exported?
North America, Europe, Middle East, Africa, Southeast Asia?and so
on.
Q3:How about your delivery time?
5-7 Working days after receiving your payment.
Q4:Product categories
1. Air Suspension Springs and Shock Absorbers
2. Passenger Car Air Spring Rubber
3. Truck Suspension Cabin Air Springs
4. Spare Parts for Air Suspension Shock Absorbers
5. Convoluted Air Springs
6. Air Suspension Compressor
7.Engine Turbocharger
8. Power Steering Pump
Q5.How to guarantee your after sales service?
1.Strict inspection during production
2. Recheck the products before shipment to ensure our packaging in
good condition
3. Track and receive feedback from our customers
Q6.What will you do for customer's complaint?
We will respond quickly to our customers within 24 hours.
About Us
Foshan Shunde Honggu Auto Parts Manufacturing Co., Ltd.,The company
mainly engaged inautomotive chassis components, engine
accessories,spray series products. The company provide design,
research and development,production, sales, for the domestic and
foreign automotive assembly plant and the global after-sales market
to provide high quality automotive parts. The company now provides
supporting services for Mercedes
Benz,Audi,BMW,Volkswagen,Porsche,Land Rover,Bentley,Jaguar,GMC etc.
Through brand positioning, the company provides high-quality
original parts and cost-effective post-market brand parts for the
global automotive sector.Now, it has set up agents and distributors
in more than 35 countries around the world,HONGGU brand is the
first batch of manufacturers approved by the Chinese ministry of
commerce tomeet the export requirements.The company through the
stable quality, the reliable prestigeand the customer first
principle obtains the customer's support.
Company purpose: people-oriented, customer first, integrity first!
Company philosophy:mutual benefit and common developmentl Company
direction: develop quality products,adhere to the brand
strategy.Trust and integrity are the cornerstones of our
long-lastingrelationships and is essential in fostering loyalty and
teamwork. We care about our people,our customers,suppliers and
communities and about creating a sustainable future together.
Advantage
1. We are top 3 of professional Air Suspension Parts manufacturer
in China.
2.Advantageous in Air Suspension Shock Absorbers, Air Compressor
Pump , Repair Kits, Valve Block etc..
3. All of our products are with high quality and competitive price.
4. Our factory had been focusing on Auto Parts Business over
12years.
5.Our products list suitable for Mercedes Benz, Audi, BMW, Land
Rover, Volkswagen, Porsche, Bentley, Jaguar, GMC, Jeep,
Rolls-Royce, Compressor etc.
6. OEM and ODM are available to support our clients
7. Monthly Production capacity is 5000pcs.
8. If order quantity is large, then price can be negotiated
9.Most of our products are exported. Europe, Middle East, Northern
Europe, Eastern Europe and North America are our mainly markets.
Southeast Asia, Asia Market Also available.
10. All of our products are 100% Brand New.
11. Goods will be test( 100% air leakage test, fatigue test etc.)
before the shipment.
12. Most of our products are in stock, we can ship the goods in
short time after we have received the payment.
13. Warranty: 12Months
OEM/ODM Service:
- If you want to show your own brand LOGO on the goods such as
cable, package bag, label or any where. Our OEM and ODM service is
always ready to do it. Please contact with our sales team to get
best support.
Packing:
- According to Standard Export Packing.
- Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou