127V/230V 5(30)A single phase two wire din rail active kwh meter with pulse output

Model YEM015SD single phase electronic DIN rail active energy meter is a kind of new style single

phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale

integrate circuit, uses advanced technique of digital and SMT techniques, etc. It has its completely

independent intellectual property rights and minimum size. It has already passed the test of the

international authority KEMA. The meter completely accords with relevant technical requirements

of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It

can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC

electricity net, it can display total energy consumption by step motor type impulse register. It has

following features: good reliability, small volume, light weight, specious appearance, convenient

installation, etc.

1. 35mm standard DIN rail installation, complying with standard IEC62053-21.

2. Single pole width (Modulus 17.5mm), complying with standard DIN43880.

3. Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.

4. Standard configuration pulse output passive (polarity),May select distant pulse output passive

( nonpolarity). And contact with all kind of AMR system conveniently,Complying with standard

IEC 62053-31 and DIN 43864.

5. Bicolor LED instructions power supply state (green) and signal of energy impulse (red).

6. Automatic detection the direction of the flow of load current. And instructions (Only red energy

impulse signal when working,If no green instructions power supply, that is meaning the direction

of the flow of load current reverse).

7. Single direction measurement single phase two wire active power consumption. It is nothing

with direction of the trend of load current. Complying with standard IEC 62053-21.

8. Directly connect and use, there are two types wiring you may select. Standard configuration

9. Extension terminals cover, in order to protect to use safety.