6060 Standard Aluminum Extrusion Profiles White Paint Surface

6060 Standard Aluminum Extrusion Profiles White Paint Surface

White Paint Surface 6063 Aluminium Door Profiles Standard Size

Product Description

White Paint Surface 6063 Aluminium Door Profiles Standard Size

White Paint Surface Aluminium Door Profiles Standard Size For Most Types Of Doors OEM Extrusion Factory

What is aluminum door profiles-Extrusion:

1: According to the door opening mode: push pull aluminum alloy door, flat open aluminum alloy door, folding aluminum alloy door.
2: According to the type of outer door frame: ordinary single outer frame aluminum door, single wall aluminum door, full frame wall aluminum door.
3: According to the width of aluminum: 46 series, 50 series, 65 series, 70 series, 80 series, 85 series, 90 series, 93 series, 99 series and other aluminum alloy doors.

characteristic
1. The material is light
2. Good sealing
3. Beautiful color
4. Convenient processing

Aluminum alloy profiles have the characteristics of high strength, strong corrosion resistance and not easy to deformation. Why do some aluminum alloy doors have gone shape before they are used for a year? After analysis, under normal use, the deformation of aluminum alloy door may be caused by the thickness of aluminum alloy profile used. It is understood that the aluminum alloy indoor door, which is available for consumers to choose in the building materials market, has a variety of thickness of 0.8mm, 1.0mm and 1.2mm. The strength of aluminum alloy doors with thickness of more than 1.0mm is better, and will not deform in 5-8 years under the condition of normal use. But some small manufacturers cut materials to reduce production cost, and even made bathroom doors with aluminum alloy profiles with thickness of only 0.6mm. Because of the thickness of the material, the aluminum alloy doors are easy to deform.
Caution: the thickness of profile directly determines the quality of aluminum alloy door. When consumers choose aluminum alloy doors, do not greedy for cheap and choose aluminum alloy doors with too thin profile.

Profile Specification:

Aluminum Door Frame Description

Interior: Non Finger-Jointed Pine or finger-jointed core with non finger-jointed Pine veneer; optional non finger-jointed Douglas Fir or finger-jointed core with non finger-jointed Douglas Fir veneer; optional non finger-jointed White Oak or finger-jointed with non finger-jointed Oak veneer; non finger-jointed Cherry or finger-jointed core with Cherry veneer; non finger-jointed Mahogany or finger-jointed core with non finger-jointed Mahogany veneer; non finger-jointed Vertical Grain Douglas Fir or finger-jointed with non finger-jointed Vertical Grain Douglas Fir veneer.

Kiln-dried to moisture content no greater than twelve (12) percent at the time of fabrication

Water repellant preservative treated in accordance with WDMA I.S.4.

Frame exterior aluminum clad with 0.050 inch (1.3mm) thick extruded aluminum

Frame thickness: 1 3/16” (30mm)

Frame depth for full frame units have an overall 5 21/32” jamb (144mm). 4 9/16” (116mm) jamb depth from the nailing fin plane to the interior face of the frame for new construction

Frame depth for replacement frame units have an overall 3 ¼” jamb (83mm) for replacement application and 2 3/16” (56mm) jamb depth from the nailing fin plane to the interior face of the frame for new construction

Frame bevel: Standard is no bevel, optional available are 8 degree and 14 degree bevel (replacement frame only)

Profile Production Characteristics:

1. There are many varieties and specifications. There are more than ten thousand kinds of products. In the production, except for a few special mills, most of the rolling mills are producing many kinds and specifications.
2. The shape of the section is different. In profile products, except for the simple and small difference in the shape of square, round and flat steel sections, most of the complex section profiles (such as I-beam, H-shaped steel, Z-shaped steel, channel steel, rail, etc.) are not only complex in shape, but also different from each other. The design of pass shape and rolling production of these products have their own particularity.
3. The complexity of the section shape makes the deformation of each part of metal, the temperature distribution of the cross section and the wear of the roll uneven during rolling. Therefore, the size of the rolled piece is difficult to calculate and control accurately, and the adjustment of the rolling mill and the installation of the guide guard are also complex.
4. In addition, the single type or specification of complex section profile is usually small in batch. The above factors make the development of the continuous rolling technology of complex section profile difficult.
5. There are many rolling mill structures and mill arrangement forms. In terms of structure, there are two high rolling mill, three high rolling mill, four high universal pass mill, multi roll pass mill, Y-type mill, 45 ° Rolling mill and cantilever mill, etc. In the layout of rolling mill, there are horizontal rolling mill, tandem mill, checkerboard mill, semi continuous mill and continuous rolling mill.

FAQ:

Q – What is the average lead time for pre production samples?

A – Our average lead time is normally 7 days for making new samples and 7 days for testing , totally need about 14days.

Q – What is the average lead time for mass production?

A – Our average lead time is delivery within 20-30 days after receive deposit and and moulds/samples are passed.

Q – What is a die?

A – A die is a tool that is used to help forge a custom shape during the extrusion process. The die is made from durable steel so that it can be used again and again to fill the client’s order.

Q – What does extrusion mean?

A – Extrusion is the process that is used to create custom shapes from raw aluminum materials according to a client’s specifications. The raw materials are heated and are then forced through a die to create the desired shape using extreme pressure.

Welcome to visit our company !

Choose us & contact us !

Product Description: