Add to Cart
12V Engine Stop Solenoid E6820 - 60011 Fit Diesel Engine CK25 Spare
Parts
Specifiion
Type | 12V Engine Stop Solenoid E6820 - 60011 Fit Diesel Engine CK25 Spare Parts |
Part Number | E6820 - 60011 / E6850 - 60012 |
Model Number | CK25 CK30 DK35 |
Size | Standard size |
Weight | 0.1-0.5KG |
Health Status | New |
Service | OEM |
Fitment Type | Direct Replacement |
Warranty | 6 month |
Express | DHL, FEDEX, EMS, UPS |
Description
When the diesel engine is turned off, there is a coil in the
solenoid valve that is the same as that of the generator. When the
power is turned on, a magnetic force is generated to pull the
shutdown switch back to the oil. When the power is off, there is no
magnetic force. oil. After the flameout solenoid valve is used for
a long time, the piston is easily blocked by dust and dirt and
cannot move, and then there is a phenomenon that the flameout
solenoid valve cannot be started or extinguished.
Solenoid valve installation note
1. When installing, it should be noted that the arrow on the valve
body should be consistent with the flow direction of the medium. Do
not install in places where there is direct dripping or splashing.
The solenoid valve should be installed vertically upwards;
2. The solenoid valve should be guaranteed to work normally within
the fluctuation range of the power supply voltage of 15%-10% of the
rated voltage;
3. After the solenoid valve is installed, there must be no reverse
pressure difference in the pipeline. And it needs to be powered on
several times to make it suitable for temperature before it can be
officially put into use;
4. The pipeline should be thoroughly cleaned before installing the
solenoid valve. The incoming medium should be free of impurities.
Install filter before valve;
5. When the solenoid valve fails or is cleaned, in order to ensure
the continuous operation of the system, a bypass device should be
installed.
More Product
JCB JS220 | K3V112DT | Yoke assy |
JCB JS220 | K3V112DT | Coil spring |
JCB JS220 | K3V112DT | Piston |
JCB JS220 | K3V112DT | Retainer plate |
JCB JS220 | K3V112DT | Gear pump |
JCB JS220 | K3V112DT/DTP | Pump Seal Kit |
JCB JS160 | K3V63DT/DTP | Pump Seal Kit |
JCB JS200 RHC62C | VA240044 | Turbocharger |
JCB JS220 SH200-A | KHR1713 | Throttle motor |
JCB JS130 160 180 | 332/J5060 | Solenoid valve |
JCB JS220 | 17/927700 | Fuel injector |
JCB JS220 | 714/40236 | Starter |
JCB JS220 | 320/08678 | Alternator |
JCB JS200 220 240 | 910/60086 | Throttle Cable |
JCB JS200 JS220 JS240 | KHR1017 | Water Temp. Sensor |