Add to Cart
PE Water Supply Pipe 110 Polyethylene Water Supply Pipe Large Diameter
----------------------------------------
Basic Info.
Connection of pipes:
1. Electrothermal fusion: A special electric fusion welding machine
is used to connect the straight pipe to the straight pipe, and the
straight pipe to the pipe fittings. Generally used for pipes below
160mm.
2. Hot-melt butt connection: use a special butt welding machine to
connect the pipes, which are generally used for pipes above 160mm.
3. Steel-plastic connection: It can be connected by flange, screw
thread and other methods.
In order to facilitate construction and ensure construction
quality, corresponding tools should also be prepared.
Such as: rotary cutter - cutting pipes; rotary scraper - scraping
off the oxide skin on the surface of the pipe; wall scraper -
scraping off the scale on the surface of large-diameter pipes; gas
cutting tool - realizing gas cutting on-site operation.
Outer Diameter DN (mm) | SDR 9 PN20 | SDR 11 PN16 | SDR 13.6 PN12.5 | SDR 17 PN10 | SDR21 PN8 | SDR26 PN6 | Packing Loaded into 40GP/Piece 6m or 12m per Piece |
Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | ||
75 | 8.4 | 6.8 | 5.6 | 4.5 | 1085 | ||
90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | 754 | |
110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 | 504 |
125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 | 378 |
140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 304 |
160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 224 |
180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 182 |
200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 143 |
225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 110 |
250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 90 |
280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 72 |
315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 | 56 |
355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 42 |
400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 30 |
450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 25 |
500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 20 |
560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 16 |
630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 | 12 |
710 | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 | 9 | |
800 | 72.7 | 58.8 | 47.4 | 38.1 | 30.6 | 6 | |
900 | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 | 6 | |
1000 | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 | 4 | |
1200 | 88.2 | 67.9 | 57.2 | 45.9 | |||
1400 | 102.9 | 82.4 | 66.7 | 53.5 | |||
1500 | 110.2 | 88.2 | 71.4 | 57.6 | |||
1600 | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
1. Basic characteristics: High-density polyethylene is an opaque
white wax-like material with a specific gravity lighter than water
and a specific gravity of 0.941~0.960. It is soft and tough, but
slightly harder than LDPE, and slightly stretchable, non-toxic and
odorless.
2. Combustion characteristics: flammable, it can continue to burn
after leaving the fire, the upper end of the flame is yellow, the
lower end is blue, it will melt when burning, there will be liquid
dripping, no black smoke will come out, and at the same time, it
will emit paraffin when it burns Smell.
3. Main advantages: acid and alkali resistance, organic solvent
resistance, excellent electrical insulation, and can still maintain
a certain degree of toughness at low temperatures. Surface
hardness, tensile strength, rigidity and other mechanical strengths
are higher than LDPE, close to PP, and better than PP Tough, but
the surface finish is not as good as PP.
Details
Application
1. Urban gas pipelines
Because HDPE gas special pipeline has strong impact resistance and
toughness. Gradually replace cast iron pipes for urban and rural
gas transmission projects. The urban gas pipeline network must not
only ensure uninterrupted and reliable supply of gas to users,
ensure the safe operation and management of the system, and
facilitate maintenance and maintenance, but also consider closing
some pipe sections without affecting the work of other systems
during maintenance or failure. Therefore, it is necessary to select
different pressure levels in the urban gas network system.
2. Sewage discharge pipes
HDPE sewage treatment pipe refers to a system of pipes, canals and
their ancillary facilities that collect and discharge sewage, waste
water and rainwater. Including mains, branches and pipes leading to
the treatment plant, whether built on the street or anywhere else,
should be counted as drains as long as they are drains. HDPE
chemical pipes have high chemical resistance to rings dissolved in
civil and industrial wastewater.
Certificate
Company Profile
High Mountain Pipe Industry has several internationally advanced
fully automated production lines with an annual output value of
more than 100 million yuan. The company has successively passed
ISO9001 quality management system, ISO14001 environmental
management system and OHSAS18001 occupational health and safety
management system certification, and has obtained various
certifications and honor. The company's products include four
series of water supply pipes, drainage pipes, gas pipes, power
communication pipes, various pressure specifications of PVC-U,
PVC-M, HDPE water supply pipes, large-diameter HDPE steel belt
corrugated pipes, and glass fiber reinforced plastics Pipes, HDPE
various multi-hole plum blossom pipes, optical cable
telecommunication pipes, etc.
The company will uphold the service concept of "Concentrate on
managing well, and do more with your heart", pursue the corporate
spirit of self-confidence, perseverance, cooperation, sincere
dedication, and pragmatic innovation, and is willing to sincerely
cooperate with friends from all walks of life to create a
harmonious and beautiful future.
FAQ
Q: Why choose us?
A: We are a professional manufacturer with competitive price,
excellent quality and fast delivery time.
Q: After reading your FAQ, I am very satisfied. How can I start
buying my order?
A: Please contact our sales manager by email or phone, thank you.
Q: After reading your FAQ, I am very satisfied. How can I start
buying my order?
A: Please contact our sales manager by email or phone, thank you.