6kg PE Plastic Barrel Visual Inspection System For Inside Outside Size Measurement

6kg PE Plastic Barrel Visual Inspection Sytem For Inside Outside Size Measurement

Overview of inspection

After the regular sampling inspection, the product will be sent to the inspection station inside our inspection machine for sequential inspection through the conveying line in a stable and orderly manner. After processing by the image processing software and AI detection algorithm, the report output will be made on the size of the key parts that need to output data.

The overall equipment integrates mechanical mechanism, visual optical hardware and detection system software. The equipment adopts a highly integrated detection and calculation module, which has the characteristics of compact space, convenient installation and deployment, accurate and fast detection, simple operation and easy use. It can be freely matched and installed at any position of the assembly line for detection to ensure product quality.

Inspection principle

Our company's design scheme adopts 5 sets of high-pixel area array industrial cameras and high-performance strobe light sources, and comprehensively detects the size of cans. The design detection speed of the whole set of detection equipment is 5 pieces per minute, and the equipment can realize 7*24 hours all-weather run.

Application of camera

1. The first station: Arrange a set of industrial cameras on the top of the tank mouth, cooperate with the use of visual light sources, collect the images of the inner and outer diameters of the tank mouth, ellipticity, and thread top diameter for analysis and processing.
2. The second station: arrange 2 sets of industrial cameras at opposite angles on the side of the tank mouth, cooperate with the use of visual light sources, collect the slope height of the tank mouth, and the image of the unevenness of the tank mouth surface for analysis and processing; The distance, measured by an algorithm.

1. The third station: Arrange a set of industrial cameras on the middle and upper part of the side of the tank mouth, and cooperate with the use of visual light sources to collect the images of the upper part of the tank - 210 height, the middle part of the tank body - 170 height above, and the middle part of the tank body - 125 height images for analysis and processing .
2. The fourth station: Arrange a set of industrial cameras at the middle and lower part of the side of the tank mouth, and cooperate with the use of visual light sources to collect the images of the middle section of the tank body - lower 80 heights and the lower part of the tank body - 50 heights for analysis and processing

After-sale service

The company has a complete technical service team and rapid response mechanism, and has dedicated service specialists for each customer, who can receive technical consultation and fault reports from customers at any time. And to ensure rapid response to customer emergencies, to ensure that customers receive satisfactory service.During the epidemic or due to special reasons, when after-sales engineers are unable to reach the site, the service center can remotely adjust customer equipment for troubleshooting and technical consultation.

After the equipment arrives at the customer site, the after-sales engineer arrives in time to carry out equipment installation, commissioning, and operation training. The product quality of the whole machine is traceable, and the quality warranty period is 1 year from the date of acceptance. In the event of non-human faults during the warranty period, after-sales engineers will quickly arrive at the site or provide remote guidance for free maintenance.

About Us

Development History

The technology center is composed of algorithm department, software department, optics department, hardware department and mechanical department. The algorithm team currently has 7 PhDs, ensuring that the AI algorithm has the ability to continuously update.

Organization Structure

Visual Inspection Solution

Vision Applications

Cooperation Partners