Add to Cart
Submerged Arc H Beam Welding Machine 1000mm With Double Cantilever For Steel Structure
Gantry gate type H-beam automatic sub-merge arc welding machine is
economical and high effecient, designed with extensivie industry
experience. It can weld two H-beam work pieces one time.
Introduction:
The welding machine has simple and reliable structure and smart
layout.
The main transmission uses imported AC frequency converter to
control both sides' synchronous speed adjusting drive, with stable
speed, reliable digital display of linear speed. And there is three
axis mechanical tracking guide arc device, while the up and down is
pneumatic tracking, the left and right is floating tracking, thus
ensure welding torch to centralize the welding seam accurately. The
sub merge arc welding power setup device is on the gantry gate, and
moves along, and in this way, the control cable and welding cable
is short, replies fast, pressure drop small, and welding currency
stable. Welding control and gate frame control are integrated and
easy to operate
Model | LHA | |||||
Rail span mm | 4000 | 5000 | 5500 | |||
Controller position | Middle | Side | Middle | Side | Middle | side |
Web height mm | 160-1200 | 160-1500 | 160-2000 | 160-2300 | 160-2200 | 160--2500 |
Flange width mm | 140-800 | |||||
Job length mm | 4000-15000 | |||||
Welding speed mm/min | 240-2400 | |||||
Machine power kW | 9 | 9.7 | ||||
Power supply | AC380V, 50HZ, 3P or tailor made | |||||
Above are our standard models and parameters, and it can be designed and manufactured on request. |
Main Features:
1.Gantry gate unit: Gantry gate,travel device,lateral sliding
device,feeding wire wheel and pipe
accessories;
2.Welding arm and carriage: Welding arm,motor transmission
device,move device and accessories (2 sets each);
3.Arc guide device: Welding gun,mechanical adjusting unit and
feeding wire machine (2 sets each);
4.Flux recovery system:100kg flux recovery machine,separate
material barrel,flux hopper,flux recoveryand transmission pipe;
5.Electric control system: Electric control cabinet,AC frequency
converter,operation box,lighting
warning light;
6.Pipe and wire system: Welding machine power wire,control
wire,welding cable,gantry gate control
cable,air source pipe,suspending sliding frame;
7.Welding system: MZ-1000/DC-1000 submerge arc welding
machine*2sets;
8.Welding Qty: 2pcs H beam once completed.