X200Y XINT Floor-standing dispensing machine

X200Y XINT Floor-standing dispensing machine

X200Y XINT Floor-standing dispensing machine

The X200Y semi-automatic offline dispensing machine has obvious advantages of high cost performance. It is reliable and durable, with a simple design, and is suitable for offline dispensing of various types of products. Supports single and dual platform product placement. The software is simple and easy to understand, ensuring the stability and reliability of the system. Designed for dispensing precision components such as FPC, Type-C, mobile phone midframes, smart glasses frames, etc.

Product Features

X200Y dispensing machine parameters

Apply technology

Double valve

The fully automatic dual-valve function can achieve product position compensation through the automatic adjustment function of the auxiliary valve, thereby ensuring the consistency of the dispensing positions of the two valves. For substrates with different odd and even numbers, the valve body can also be designated for dispensing.

FAQ

1.The dispensing volume of the X200Y dispensing machine is unstable. How to adjust it?

Possible causes: Fluctuations in air pressure, changes in glue viscosity, improper setting of glue dispensing time or excessive pipeline resistance.

Solution:

Ensure the stability of the intake pressure. The set value of the pressure regulating gauge should be 10-15psi lower than the minimum pressure in the factory. Avoid using the medium and low range of the pressure gauge.

Adjust the back pressure according to the viscosity of the glue (it is recommended to be 50-150psi), and the glue dispensing time is recommended to be no less than 15/1000 seconds to improve stability.

Shorten the pipeline length or replace it with a 3/8-inch pipeline to reduce resistance and optimize the design of the rubber outlet.

2.How to troubleshoot the occurrence of glue breakage or missed points during the dispensing process?

Possible causes: Air bubbles in the glue, clogged needle, insufficient sealing of the glue valve or incorrect controller parameters.

Solution:

Check whether the glue has completely degassed. If necessary, perform centrifugal degassing or vacuum treatment.

Clean or replace the clogged needle and regularly check whether the sealing ring of the rubber valve is aged.

Calibrate the controller parameters to ensure that the rubber valve switching valve operates normally and avoid jamming.

3.How to improve the accuracy of X200Y during high-speed dispensing?

Optimization suggestions:

Servo motor control is adopted and the motion trajectory algorithm is optimized to reduce the inertia error [citation: Speculation based on the company's technical background].

Use high-precision needles (such as small-diameter PP material needles) and calibrate the dispensing position regularly.

Keep the ambient temperature between 23 and 25℃ and the humidity between 40 and 60% to prevent fluctuations in temperature and humidity from affecting the properties of the glue.

4.What precautions should be taken when the equipment operates in a high-temperature or high-humidity environment?

Notes:

Install air conditioners or dehumidification equipment in the workshop to prevent the glue from absorbing moisture and deteriorating.

Regularly inspect the air compression system to ensure that the compressed air is dry (multi-layer filters can be installed).

Shorten the glue replacement cycle to avoid a decline in glue performance due to environmental factors.

CNSMT started in 2010, focusing on providing SMT full line equipment solutions for electronics manufacturing companies. In recent years,

We have expanded the overall solution for the intelligent manufacturing of 3C and 5G manufacturing enterprises, and at the same time can provide high-end materials and tools for electronic manufacturing enterprises and glass manufacturing enterprises.

We always adhere to the model of the casting industry of "guide the market with technology, shape the brand with quality, and strive for excellence", adhering to the service concept of "professional management, honest service, and customer first", and become a world-renowned international brand enterprise.

CNSMT leases and sells about 600 new SMT/AI equipment annually, mainly engaged in Panasonic placement machines, Samsung placement machines, JUKI placement machines, YAMAHA placement machines, Mirea placement machines, Sony placement machines, and Fuji placement machines. , Siemens placement machines, LED placement machines and other new and second-hand high-end overseas brand equipment, as well as new domestic independent outstanding brands, including automatic printing machines, SPI, placement machines, AOI, reflow soldering, plug-in machines and other major equipment. It is one of the world's largest suppliers of new electronic manufacturing equipment.

Among them, CNSMT is mainly based on automatic printing machines, SPI, placement machines, AOI, reflow soldering, plug-in machines, dispensers, spraying machines, X-ray, FPC laser cutting machines and SMT supporting equipment; among them, placement machines And some high-end equipment are foreign brands, and other equipment are mainly CNSMT independent brands and domestic brands.

CNSMT has become the industry's first high-quality SMT equipment integration supplier and the first choice of electronics manufacturing companies.

CNSMT upholds the enterprise spirit of "confidence, dedication, collaboration, and innovation". After nearly 20 years of continuous hard work, forge ahead, and continuous innovation,

We have become one of the most influential and well-known word-of-mouth companies and conscientious companies in the SMT industry. Relying on more than 30 years of technical experience in the SMT industry and more than 15 years of company customer service cases; relying on a one-stop equipment inventory and resource integration platform, and a complete after-sales service system; wholeheartedly providing a one-stop service for electronics manufacturing companies Equipment sales and leasing services.

Our main products: