OEM ODM Horiba Abx Hematology Reagent For Pentra 120 Analyzers

Hematology Analyzer Reagents Horiba Abx Hematology Reagent For Pentra120 Analyzers

Intended Use

To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on ABX PENTRA120 hematology analyzers. This product is for In Vitro Diagnostic Use only.

APPLICABLE INSTUMENT

For use with Pentra120 hematology analyzers.

Specification

KIT COMPOSITION

Procedures

• From the run screen, press “ESC” to access the “MAIN MENU.
• Remove the Diluent Line from the Diluent box.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
• Place the tubes on a dry clean place.
• Using the arrow keys to select the menu “3-Reagents” and press “Enter”
• From the Reagents menu, using the arrow keys to select the menu “3-Prime” and press “1-Diluent”. This step will purge the diluent lines with air to make sure that the reagents will not be mixed with the previously used ones. At this step an error message appears: “Error: NO Diluent, Check Level”
• Press “ESC”. At this step an error message appears: “Emergency stop, Run an autocontrol”
• Press “ESC” three times to access the Main Menu.
• Press “4-Maintanence” – “1-Autocontrol cycle”. After the cycle has been done, press “ESC”.
• Press “3-Reagents” – “3-Prime”
• Remove all the lines from the bottles Cleaner, Eosinofix, Basolyse II, and Alphalyse.
• Press “2-Cleaner”. This step will purge the Cleaner lines with air.
• Press “3-Eosinofix”. This step will purge the Eosinofix lines with air.
• Press “4- Basolyse II”. This step will purge the Basolyse lines with air.
• Press “5-Alphalyse”. This step will purge the Alphalyse lines with air.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
• Put all five reagent aspiration tubes into the appropriate Labnovation box and bottles.
• Press “ESC” – “1-Level Change” – “All reagents” This step will set all reagent levels to full (100%), and an autoprime cycle will be done.
• Press “ESC” – “Prime” – “All reagents”. Repeat this step once again.
• After all three prime cycles have been done, press “ESC” key three times, to access the “Start Cycle” menu.
• Run at least 5 backgrounds. Check for the acceptable values.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary. The default pathword for ABX Pentra 60 users is “123”.

Labnovation Technologies, Inc. is an original manufacturer established in Shenzhen, China since 2001. We are dedicated in developing and manufacturing IVD instruments and reagents including HbA1c analyzer and reagents, rapid test reader & reagents, hematology reagents, clinical chemistry reagents, electrolyte reagents, wash solution and urine test reagents.

Labnovation products are developed in house, tested extensively in clinics and passed strict quality controls. All of our products are CE marked and approved by SFDA. In the past 15 years, our products have been exported to 110 different countries and used in 8000 hospitals worldwide. We provide both ready-to-use final products and bulk OEM reagents, including ready-to-use reagents, concentrated, and powder.

With an investment of 10% of our annual sales into R&D, we release new products every years. We win more and more domestic and international cooperation by company reputation and products quality while we actively take part in fairs like MEDICA,AACC, ARBA HEALTH and so on through which we are well-known by the companies in this field.