Smart Battery Protection Board , BMS with balancer 17S-24S 80A With BT UART 60V 72V
Brand Name:XUWEN
Certification:CE,FCC,RoHS,UN38.3,MSDS
Model Number:Smart BMS System 17S-24S 80A
Minimum Order Quantity:1pc
Delivery Time:To be negotiated
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
4 Floor, Building 8, Yujingtai Industrial Park, 35 Huaxing Road, Shenzhen, Guangdong, China
Supplier`s last login times:
within 14 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Smart BMS System 17S-24S 80A Battery Protection Board With BT UART 60V 72V 84V Balancer
Product parameter
Power supply : 10～90V
Sleep power consumption: >50uA
SOC estimation difference: ±5 %
Operating temperature: -40～85℃
Balanced: 60mA
Cell voltage collection range : 0～5V
Detects the difference : ±10mV FS
Total battery voltage collection range: 10V～90V
Detects the difference : ±100mV FS
Charge and discharge current collection range : ＞500A
Detects the difference : ±2 %
Working power consumption: Less than 1.5W
System startup method: External passive switching signal
Temperature collection range : -40～125℃
Detects the difference : ±1℃
Communication method: 1 UART serial port, support Modbus protocol
Recommended parameters
Li-ion
➤Charging cut off
Voltage detection: 4.25V
Voltage release: 4.15V
Detection delay: 1000mS
➤Discharge cut off
Voltage detection: 2.7 V ± 0.1V
Voltage release: 2.9V ± 0.1V
Detection delay: 1000mS
➤Charging voltage
17S 18S 19S 20S 21S 22S 23S 24S * 4.2V
➤Discharging current
80A
➤Chargingcurrent
80A
Lifepo4
➤Charging cut off
Voltage detection: 3.65V
Voltage release: 3.55V
Detection delay: 1000mS
➤Discharge cut off
Voltage detection: 2.4 V
Voltage release: 2.6V
Detection delay: 1000mS
➤Charging voltage
17S 18S 19S 20S 21S 22S 23S 24S * 3.6V
➤Short circuit cut off
External load short circuit
Detection delay:250μS
Release method:Disconnect load
➤Overcurrent cut off
80A×1.5-2.5times
Delay: 3000mS
Release method:Disconnect load
➤Balanced opening differential pressure: 0.03V-0.05V
➤Temperature cut off
Charge and discharge:≥75℃
Recovery temperature: ＜50℃
Adjustment range: -20℃ to 85℃
Power supply : 10～90V
Sleep power consumption: >50uA
SOC estimation difference: ±5 %
Operating temperature: -40～85℃
Balanced: 60mA
Cell voltage collection range : 0～5V
Detects the difference : ±10mV FS
Total battery voltage collection range: 10V～90V
Detects the difference : ±100mV FS
Charge and discharge current collection range : ＞500A
Detects the difference : ±2 %
Working power consumption: Less than 1.5W
System startup method: External passive switching signal
Temperature collection range : -40～125℃
Detects the difference : ±1℃
Communication method: 1 UART serial port, support Modbus protocol
Recommended parameters
Li-ion
➤Charging cut off
Voltage detection: 4.25V
Voltage release: 4.15V
Detection delay: 1000mS
➤Discharge cut off
Voltage detection: 2.7 V ± 0.1V
Voltage release: 2.9V ± 0.1V
Detection delay: 1000mS
➤Charging voltage
17S 18S 19S 20S 21S 22S 23S 24S * 4.2V
➤Discharging current
80A
➤Chargingcurrent
80A
Lifepo4
➤Charging cut off
Voltage detection: 3.65V
Voltage release: 3.55V
Detection delay: 1000mS
➤Discharge cut off
Voltage detection: 2.4 V
Voltage release: 2.6V
Detection delay: 1000mS
➤Charging voltage
17S 18S 19S 20S 21S 22S 23S 24S * 3.6V
➤Short circuit cut off
External load short circuit
Detection delay:250μS
Release method:Disconnect load
➤Overcurrent cut off
80A×1.5-2.5times
Delay: 3000mS
Release method:Disconnect load
➤Balanced opening differential pressure: 0.03V-0.05V
➤Temperature cut off
Charge and discharge:≥75℃
Recovery temperature: ＜50℃
Adjustment range: -20℃ to 85℃
Product advantages:
1. BMS with bluetooth module can be used to view battery parameters
on the Phone( Compatible with Android and IOS)
2. You can also develop your own application system program according to your needs. We can provide the original communication
protocol.
3. The main protection functions of BMS are: overcharge protection, overdischarge protection, overcurrent protection, balance
protection, short circuit protection, NTC temperature control protection, etc.
4. APP software can adjust hardware and software parameters.
5. It is compatible with Li-ion and Lifepo4 battery pack.
6. It can be compatible with 17S-24S lithium battery pack. The length of the balanced cable is about 580mm. There are marks on
each cable such as B-, B1+, B2+……B16+, B+. This is a very convenient design for welding cables.
7. Static balance: setting the battery voltage difference between 0.03V-0.05V, it will automatically turn on the balance function.
When the balance is turned on, there will be an LED balance light.
8. Product size: 155x90x13mm. It is suitable for installation in any battery pack size.
9. It is compatible with 17S 18S 19S 20S 21S 22S 23S 24S battery pack.
10. App main interface display parameters:
1) Full capacity
2) Remaining capacity
3) Number of cycles
4) Health Index
5) Highest cell voltage
6) Lowest cell voltage
7) Maximum temperature
8) Minimum temperature
9) Cell overvoltage and undervoltage
10) Battery pack overvoltage and undervoltage
11) Charging and discharging overcurrent
12) Charging and discharging high temperature and low temperature
13) Short circuit, differential pressure protection
14) Secondary discharge current
15) Each cell voltage
16) Real-time temperature
17) Capacity percentage
18) Display voltage and battery capacity
11. The protection parameter settings can be modified:
1) Total voltage overvoltage and undervoltage protection value, protection delay, release voltage, release delay
2) Cell overvoltage and undervoltage protection values, protection delay, release voltage, release delay
3) High temperature and low temperature charge and discharge protection temperature, time delay, release temperature, release
delay.
4) Charge and discharge overcurrent protection value, delay, release value, release delay.
5) Secondary discharge overcurrent protection value, delay, release value, release delay.
6) Short circuit and differential pressure protection value.
7) Balance voltage, differential pressure, proportion, enable, low speed, medium speed and full speed balance pressure
differential.
8) Modifiable hardware parameters: total number of strings, rated capacity, iterative upper and lower limit shrinkage percentage,
bias current, actual full capacity adjustment rate, charging and discharging energy efficiency percentage, slow, medium and fast
sleep and other modifiable parameters.
9) It can reset and restore factory settings
12. We will send the English manual of APP software to all buyers who order this product.
13. If your demand reaches 20 pieces, we can help you customize the length and size of B - and C - wires.
14. Package included: BMS+bluetooth module+cables.
2. You can also develop your own application system program according to your needs. We can provide the original communication
protocol.
3. The main protection functions of BMS are: overcharge protection, overdischarge protection, overcurrent protection, balance
protection, short circuit protection, NTC temperature control protection, etc.
4. APP software can adjust hardware and software parameters.
5. It is compatible with Li-ion and Lifepo4 battery pack.
6. It can be compatible with 17S-24S lithium battery pack. The length of the balanced cable is about 580mm. There are marks on
each cable such as B-, B1+, B2+……B16+, B+. This is a very convenient design for welding cables.
7. Static balance: setting the battery voltage difference between 0.03V-0.05V, it will automatically turn on the balance function.
When the balance is turned on, there will be an LED balance light.
8. Product size: 155x90x13mm. It is suitable for installation in any battery pack size.
9. It is compatible with 17S 18S 19S 20S 21S 22S 23S 24S battery pack.
10. App main interface display parameters:
1) Full capacity
2) Remaining capacity
3) Number of cycles
4) Health Index
5) Highest cell voltage
6) Lowest cell voltage
7) Maximum temperature
8) Minimum temperature
9) Cell overvoltage and undervoltage
10) Battery pack overvoltage and undervoltage
11) Charging and discharging overcurrent
12) Charging and discharging high temperature and low temperature
13) Short circuit, differential pressure protection
14) Secondary discharge current
15) Each cell voltage
16) Real-time temperature
17) Capacity percentage
18) Display voltage and battery capacity
11. The protection parameter settings can be modified:
1) Total voltage overvoltage and undervoltage protection value, protection delay, release voltage, release delay
2) Cell overvoltage and undervoltage protection values, protection delay, release voltage, release delay
3) High temperature and low temperature charge and discharge protection temperature, time delay, release temperature, release
delay.
4) Charge and discharge overcurrent protection value, delay, release value, release delay.
5) Secondary discharge overcurrent protection value, delay, release value, release delay.
6) Short circuit and differential pressure protection value.
7) Balance voltage, differential pressure, proportion, enable, low speed, medium speed and full speed balance pressure
differential.
8) Modifiable hardware parameters: total number of strings, rated capacity, iterative upper and lower limit shrinkage percentage,
bias current, actual full capacity adjustment rate, charging and discharging energy efficiency percentage, slow, medium and fast
sleep and other modifiable parameters.
9) It can reset and restore factory settings
12. We will send the English manual of APP software to all buyers who order this product.
13. If your demand reaches 20 pieces, we can help you customize the length and size of B - and C - wires.
14. Package included: BMS+bluetooth module+cables.
Smart Battery Protection Board , BMS with balancer 17S-24S 80A With BT UART 60V 72V
Inquiry Cart
0