2200 Lbs Rubber Torsion Axle 5 Bolts PCD 114.3 With Hub And 1-2/20 Unf Wheel Nut

2200 Lbs Capacity Rubber Torsion Axle 5 Bolts PCD 114.3 With Hub And 1-2/20 Unf Wheel Nut

Detailed Specification

Questions that lead the user to the right axle:

Axles can be built with a small positive camber built into the beam, typically 1/4” Positive Camber. This is referred to as a “Cambered Axle”. These axle beams are engineered with a slight upward bend so that when the load is placed on the trailer, the axle beam deflects to the load condition, enabling the tires to ride flat on the road. Some customers prefer to have no camber. It is optional on most axle orders. Most axles are standard with a cambered beam. The Camber of the axle is non-adjustable and is a permenant option.

TRACK WIDTH: To determine your trailer’s track width, measure from the center of one tire to the center of the opposite tire on the other end of the same axle. A more precise measurement can be obtained by measuring the distance from the hub’s face to the other end’s hub face. This hub face (or track width) measurement will tell you the axle’s length.

Our Advantage

1>Our joint venture partners are American Famous axle company AXLETEK,we have make a cooperation for 6 years.So we can supply stable and high quality brakes.

2>We have Researching and Development Department in Detroit,so we are also capable of developing products according drawing or samples to meet the special requirement of our customes.

3>We can supply 7 inch,10 inch,12 inch and 12.25 inch brakes for the moment.

4>All the parts for the brakes are produced by ourself,so we can supply our customer high quality products with resonable price.

5>We can also supply axle assemly.

1. who are we?