AA4C Pneumatic Spring Dismantler Shock Spring Dismantler Tools Tire Changer Changing Tire Machine QT-1500

Pneumatic Vehicle Spring disaseembler AA-QT1500

A shock spring dismantler is a tool used to compress shock absorber springs when replacing or servicing shock absorbers on a car or other vehicle. It consists of a threaded rod and two clamping cups that grip the spring coils. The threaded rod is turned with a ratchet or other tool, which exerts force on the spring and compresses it. This allows the shock absorber to be removed or installed safely.

When using a shock spring dismantler, it's important to follow the manufacturer's instructions carefully and to observe all safety precautions. Compression of the spring generates a lot of potentially dangerous energy, which can cause injury if the tool is not used properly.

here are some safety tips for using a shock spring dismantler:

1. Before working on the shock absorber or spring, ensure that the vehicle is supported securely on jack stands or a lift, and that the wheels are chocked to prevent rolling.

2. Wear appropriate personal protective equipment, including eye protection and heavy work gloves.

3. Follow the manufacturer's instructions carefully, and use only the recommended tools and equipment.

4. Always inspect the spring and dismantler for signs of wear, damage, or defects before use.

5. Use a high-quality, heavy-duty shock spring dismantler that is designed for the size and type of spring you are working with.

6. Make sure that the clamping cups are positioned securely on the spring coils, and that the dismantler is threaded onto the assembly straight and level.

7. Use a ratchet or other tool to turn the dismantler slowly and with even force, taking frequent breaks to inspect the spring for signs of fatigue or cracking.

8. If the spring becomes damaged or fails during the compression process, stop work immediately and replace it before continuing.

9. Always work with a partner or helper who can assist you in case of an emergency. And finally,

10. Never substitute makeshift or improvised tools for a proper shock spring dismantler.

A shock spring dismantler is a tool used to remove or install shock absorber springs in vehicles, motorcycles, and other equipment. It works by compressing the spring using a hydraulic or pneumatic system, which allows you to safely remove or install the spring without damaging the spring or the surrounding components.

To use a shock spring dismantler, you typically need to first secure the shock absorber assembly in a vise or clamping system. You then position the dismantler tool onto the shock absorber and begin compressing the spring using the hydraulic or pneumatic pump until it has been fully compressed. Once the spring has been compressed, you can safely remove the top hat, spring seat, and other components from the shock absorber assembly or install a new spring.

It's important to use caution when working with a shock spring dismantler and to always follow the manufacturer's instructions to prevent injury or damage to your equipment.

If the spring becomes damaged during the compression process, stop work immediately and replace the spring before proceeding. A damaged spring can be very dangerous and should not be used, as it can lead to failure of the suspension system, which could cause loss of control of the vehicle.

If you notice any signs of damage or fatigue on the spring before attempting to compress it, you should also replace it before proceeding. Signs of damage could include visible cracks or distortion of the spring coils.

In any case, it's always a good idea to regularly inspect the shock absorbers and suspension system on your vehicle, and to replace any worn or damaged components as soon as possible to ensure safe and reliable operation.

This product is suitable for cars, SUVs, vans, pickup trucks and so on
The disassembly and assembly of the strut damping spring. With strong versatility,
Easy to operate, safe and reliable. It is equipped with cylinders of 150mm diameter
And other pneumatic components powered by compressed gas and operated by only one person
You can remove and install the shock absorbers quickly and easily.

Technical parameters:
① Cylinder compression force: ≤1500Kg;
② Spring wire diameter: ≤16mm;
The maximum stroke of the cylinder: 200mm;

Native features: group is equipped with upper and lower jaw, jaw according to spring spacing can be fine-tuning level Angle, when the jaw stuck springs at both ends up and down, on the right foot valve spring to compression, compression to the spring and pillar completely release, foot from the pedal, a compact pillar or replace spring can replace or change the top part.

Matters needing attention:
The oil cup of the air source processor must be filled with white oil at a height of 3/4, and the filter cup must be drained regularly to protect the cylinder and foot valve. The air pressure into the cylinder should be less than or equal to 8kg.
Step on the right foot valve to rise (spring compression), step on the left foot valve to fall (spring stretching).
(3) When clamping the shock absorber, the iron hook and chain must be placed well at the same time before the machine can be tested, and the foot should be gently stepped on the air control valve.
④ When working, children or miscellaneous personnel should be avoided near the machine. Operators should always pay attention to safety.