Add to Cart
The specification of stainless steel angle steel is expressed by
the dimension of side length and side thickness. Since 2010, the
specification of domestic stainless steel angle steel is 2-20, with
the number of centimeters of side length as the number. The same
stainless steel angle steel often has 2-7 different side
thicknesses. Imported stainless steel angle steel shall indicate
the actual size and edge thickness on both sides and relevant
standards. Generally, large stainless steel angle steel is used
when the side length is more than 12.5cm, medium stainless steel
angle steel is used when the side length is between 12.5cm and 5cm,
and small stainless steel angle steel is used when the side length
is less than 5cm.
The order of import and export stainless steel angle steel is
generally based on the specifications required in use, and its
steel grade is the corresponding carbon steel grade. That is,
stainless steel angle steel has no specific composition and
performance series except specification number.The delivery length
of stainless steel angle steel is divided into fixed length and
double length. The fixed length selection range of domestic
stainless steel angle steel is 3-9m, 4-12m, 4-19m and 6-19m
according to the specification number. The length selection range
of stainless steel angle steel made in Japan is 6-15m.The section
height of unequal stainless steel angle steel is calculated
according to the length and width of unequal stainless steel angle
steel.
Product Name | angle bar/V-steel/ steel angle |
Grade | construction carbon steel |
Standard | JIS, AiSi, ASTM, GB, DIN, EN |
Length | 6m 9m 12m or other length based on demand |
Thickness | 3-25mm |
Type | equal and unqual |
Surface | painted,galvanized |
Application | Construction |
Thickness Tolerance | ±1-3% |
Processing Service | Bending, Welding,Punching, Cutting |
MOQ | 3 Ton |