AT45DB641E AT45DB641E-SHN2B-T AT45DB641E-MHN2B-T Adesto Technologies NOR FLASH Memory IC Components

AT45DB641E-SHN2B-T Adesto Technologies NOR FLASH Memory IC Components

AT45DB641E-SHN2B-T IC FLASH Memory IC 64Mb (256 Bytes x 32K pages) SPI 85 MHz 8-SOIC

64-Mbit DataFlash (with Extra 2-Mbits), 1.7V Minimum SPI Serial Flash Memory

AT45DB641E-MHN2B-T IC FLASH 64MBIT SPI 85MHZ 8UDFN

NOR Flash 64 Mbit, Wide Vcc (1.7V to 3.6V), -40C to 85C, 512 Byte Binary Page Mode, DFN 5x6 (Tape & Reel), Single SPI DataFlash

AT45DB641E Description :

The AT45DB641E is a 1.7V minimum, serial-interface sequential access Flash memory ideally suited for a wide variety of digital voice, image, program code, and data storage applications. The AT45DB641E also supports the RapidS serial interface for applications requiring very high speed operation. Its 69,206,016 bits of memory are organized as 32,768 pages of 256 bytes or 264 bytes each. In addition to the main memory, the AT45DB641E also contains two SRAM buffers of 256/264 bytes each. Interleaving between both buffers can dramatically increase a system's ability to write a continuous data stream. In addition, the SRAM buffers can be used as additional system scratch pad memory, and E2PROM emulation (bit or byte alterability) can be easily handled with a self-contained three step read-modify-write operation.Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash® uses a serial interface to sequentially access its data. The simple sequential access dramatically reduces active pin count, facilitates simplified hardware layout, increases system reliability, minimizes switching noise, and reduces package size. The device is optimized for use in many commercial and industrial applications where high-density, low-pin count, low-voltage, and low-power are essential.To allow for simple in-system re-programmability, the AT45DB641E does not require high input voltages for programming. The device operates from a single 1.7V to 3.6V power supply for the erase and program and read operations. The AT45DB641E is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of the Serial Input (SI), Serial Output (SO), and the Serial Clock

Features:

Single 1.7V - 3.6V supply

Serial Peripheral Interface (SPI) compatibleSupports SPI modes 0 and 3

Supports RapidS™ operation

Continuous read capability through entire array

Up to 85MHzLow-power read option up to 15MHz

Clock-to-output time (tV) of 8ns maximum

User configurable page size

256 bytes per page

264 bytes per page (default)

Page size can be factory pre-configured for 256 bytes

Two fully independent SRAM data buffers (256/264 bytes)

Allows receiving data while reprogramming the main memory array

Flexible programming options

Byte/Page Program (1 to 256/264 bytes) directly into main memory

Buffer Write | Buffer to Main Memory Page Program

Flexible erase optionsPage Erase (256/264 bytes)

Block Erase (2KB)Sector Erase (256KB)Chip Erase (64-Mbits)

Program and Erase Suspend/Resume

Advanced hardware and software data protection features

Individual sector protectionIndividual sector lockdown to make any sector permanently read-only

128-byte, One-Time Programmable (OTP) Security Register

64 bytes factory programmed with a unique identifier

64 bytes user programmableHardware and software controlled reset options

JEDEC Standard Manufacturer and Device ID Read

Low-power dissipation

400nA Ultra-Deep Power-Down current (typical)

5µA Deep Power-Down current (typical)

25µA Standby current (typical)

7mA Active Read current (typical)

Endurance: 100,000 program/erase cycles per page minimum

Data retention: 20 years

Complies with full industrial temperature range

Green (Pb/Halide-free/RoHS compliant) packaging options

8-lead SOIC (0.208" wide)8-pad Ultra-thin DFN (5 x 6 x 0.6mm)

8-pad Very-thin DFN (6 x 8 x 1.0mm)

44-ball dBGA (6 x 8 modified ball array)

Adesto Technologies NOR FLASH Memory Integrated circuit IC Specification :

Similar DIALOG SEMICONDUCTOR Integrated circuit IC Adesto Technologies:

AT45DB641E,AT45DB641E-SHN2B-T,AT45DB641E-MHN2B-T,AT45DB641E-MWHN2B-T,AT45DB641E-UUN2B-T,AT45DB641E-SHN-B,AT45DB641E-SHN-T,AT45DB641E-MHN-Y,AT45DB641E-MHN-T,AT45DB641E-MWHN-Y,AT45DB641E-MWHN-T,AT45DB641E-UUN-T,AT45DB641E-DWF,AT 45DB641E-SHN2B-B

More popular Integrated circuit IC parts Number:

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.