DsPIC30F3010-I/SO DsPIC30F3011 Motor Control 16-Bit Digital Signal Controller IC Integrated Circuit

dsPIC30F3010 dsPIC30F3011 Motor Control 16-bit Digital Signal Controller IC integrated circuit

Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

Parts number :

DSPIC30F3010-30I/SO DSPIC30F3010-20I/SO DSPIC30F3010T-30I/SO DSPIC30F3010T-20I/SO

DSPIC30F3010-30E/SO DSPIC30F3010-20E/SO DSPIC30F3010T-30E/SO DSPIC30F3010T-20E/SO

DSPIC30F3010-30I/ML DSPIC30F3010-20I/ML DSPIC30F3010T-30I/ML DSPIC30F3010T-20I/ML

DSPIC30F3010-30I/SP DSPIC30F3010-20I/SP

High-Performance Modified RISC CPU
• Modified Harvard Architecture
• C Compiler Optimized Instruction Set Architecture
with Flexible Addressing modes
• 83 Base Instructions
• 24-bit Wide Instructions, 16-bit Wide Data Path
• 24 Kbytes On-Chip Flash Program Space
(8K instruction words)
• 1 Kbyte of On-Chip Data RAM
• 1 Kbyte of Nonvolatile Data EEPROM
• 16 x 16-bit Working Register Array
• Up to 30 MIPs Operation:
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x)
• 29 Interrupt Sources
- 3 external interrupt sources
- 8 user-selectable priority levels for each
interrupt source
- 4 processor trap sources

DSP Engine Features:
• Dual Data Fetch
• Accumulator Write Back for DSP Operations
• Modulo and Bit-Reversed Addressing modes
• Two, 40-bit Wide Accumulators with Optional saturation Logic
• 17-bit x 17-bit Single-Cycle Hardware Fractional/Integer Multiplier
• All DSP Instructions Single Cycle
• ±16-bit Single-Cycle Shift

Peripheral Features:
• High-Current Sink/Source I/O Pins: 25 mA/25 mA
• Timer module with Programmable Prescaler:
- Five 16-bit timers/counters; optionally pair
16-bit timers into 32-bit timer modules
• 16-bit Capture Input Functions
• 16-bit Compare/PWM Output Functions
• 3-Wire SPI modules (supports 4 Frame modes)
• I2CTM module Supports Multi-Master/Slave mode
and 7-bit/10-bit Addressing
• 2 UART modules with FIFO Buffers
Motor Control PWM Module Features:
• 6 PWM Output Channels
- Complementary or Independent Output
modes
- Edge and Center-Aligned modes
• 3 Duty Cycle Generators
• Dedicated Time Base
• Programmable Output Polarity
• Dead-Time Control for Complementary mode
• Manual Output Control
• Trigger for A/D Conversions
Quadrature Encoder Interface Module

Features:
• Phase A, Phase B and Index Pulse Input
• 16-bit Up/Down Position Counter
• Count Direction Status
• Position Measurement (x2 and x4) mode
• Programmable Digital Noise Filters on Inputs
• Alternate 16-bit Timer/Counter mode
• Interrupt on Position Counter Rollover/Underflow
Analog Features:
• 10-bit Analog-to-Digital Converter (ADC) with
4 Sample and Hold (S&H) Inputs:
- 1 Msps conversion rate
- 9 input channels
- Conversion available during Sleep and Idle
• Programmable Brown-out Reset

Special Microcontroller Features:
• Enhanced Flash Program Memory:
- 10,000 erase/write cycle (min.) for
industrial temperature range, 100K (typical)
• Data EEPROM Memory:
- 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
• Self-Reprogrammable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT)
and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with On-Chip
Low-Power RC Oscillator for Reliable Operation
• Fail-Safe Clock Monitor Operation Detects Clock
Failure and Switches to On-Chip Low-Power RC

Oscillator
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
- Sleep, Idle and Alternate Clock modes

CMOS Technology:
• Low-Power, High-Speed Flash Technology
• Wide Operating Voltage Range (2.5V to 5.5V)
• Industrial and Extended Temperature Ranges
• Low Power Consumption

Specification:

Environmental & Export Classifications

More 16-bit PIC MCU and DSC Microchip Part number:

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.