R5F566NNDDBD#20 RXv3 RX66N R5F566 Renesas MCUs Microcontroller IC 32 Bit

RXv3 RX66N series Microcontroller IC 32-Bit FLASH 224-LFBGA R5F566NNDDBD#20

RXv3 series Microcontroller IC 32-Bit 120MHz 4MB (4M x 8) FLASH 224-LFBGA (13x13)

IC MCU 32BIT 4MB FLASH 224LFBGA

Applications:

■ AC servo driver

■ General-purpose inverter

■ PLC (Programmable Logic Controller)

■ Industrial robot

■ Motion controller

■ Remote I/O

■ HVAC controller

■ Smart meter

■ Smart speaker

RXv3 Series :

120-MHz 32-bit RX MCU, on-chip double-precision FPU, 698 CoreMark, up to 4-MB flash memory (supportive of the dual bank function), 1-MB SRAM, various communications interfaces including Ethernet MAC, SD host interface, quad SPI, and CAN, 12-bit A/D converter, RTC, Encryption functions (optional), Serial sound interface, CMOS camera interface, Graphic-LCD controller, 2D drawing engine.

Features

■ 32-bit RXv3 CPU core

 Maximum operating frequency: 120 MHz Capable of 698 CoreMark in operation at 120 MHz

 Double-precision 64-bit IEEE-754 floating point

 A collective register bank save function is available.

 Supports the memory protection unit (MPU)  JTAG and FINE (one-line) debugging interfaces

■ Low-power design and architecture

 Operation from a single 2.7- to 3.6-V supply

 RTC is capable of operation from a dedicated power supply.

 Four low-power modes

■ On-chip code flash memory

 Supports versions with up to 4 Mbytes of ROM

 Read cycle of 8.3 ns in operation at 120-MHz with no access wait cycles

 User code is programmable by on-board or off-board programming.

 Programming/erasing as background operations (BGOs)

 A dual-bank structure allows exchanging the start-up bank.

■ On-chip data flash memory

 32 Kbytes, reprogrammable up to 100,000 times

 Programming/erasing as background operations (BGOs)

■ On-chip SRAM  1 Mbyte of SRAM (no wait states)

 32 Kbytes of RAM with ECC (single error correction/double error detection)

 8 Kbytes of standby RAM (backup on deep software standby)

■ Data transfer  DMACAa: 8 channels

 DTCb: 1 channel

 EXDMAC: 2 channels

 DMAC for the Ethernet controller: 1 channel

■ Reset and supply management

 Power-on reset (POR)

 Low voltage detection (LVD) with voltage settings

■ Clock functions

 External crystal resonator or internal PLL for operation at 8 to 24 MHz

 PLL for specific purposes

 Internal 240-kHz LOCO and HOCO selectable from 16, 18, and 20 MHz  120-kHz clock for the IWDTa

■ Real-time clock

 Adjustment functions (30 seconds, leap year, and error)

 Real-time clock counting and binary counting modes are selectable

 Time capture function (for capturing times in response to event-signal input)

■ Independent watchdog timer  120-kHz clock operation

■ Useful functions for IEC60730 compliance

 Oscillation-stoppage detection, frequency measurement, CRCA, IWDTa, self-diagnostic function for the A/D converter, etc.

 Register write protection function can protect values in important registers against overwriting.

Various communications interfaces

 Ethernet MAC (1 channel)

 PHY layer (1 channel) for host/function or OTG controller (1 channel) with full-speed USB 2.0 transfer

 CAN (compliant with ISO11898-1), incorporating 32 mailboxes (up to 3 channels)

 SCIj and SCIh with multiple functionalities (up to 8 channels) Choose from among asynchronous mode, clock-synchronous mode, smart-card interface mode, simplified SPI, simplified I2C, and extended serial mode.

 SCIi with 16-byte transmission and reception FIFOs (up to 5 channels)

 I2C bus interface for transfer at up to 1 Mbps (3 channels)

 Four-wire QSPI (1 channel) in addition to RSPIc (3 channels)

 Parallel data capture unit (PDC) for the CMOS camera interface (except for 100-pin products)

 Graphic-LCD controller (GLCDC)

 2D drawing engine (DRW2D)

 SD host interface (1 channel) with a 1- or 4-bit SD bus for use with SD memory or SDIO

 MMCIF with 1-, 4-, or 8-bit transfer bus width ■ External address space

 Buses for full-speed data transfer (max. operating frequency of 80 MHz)

 8 CS areas

 8-, 16-, or 32-bit bus space is selectable per area

 Independent SDRAM area (128 Mbytes)

■ Up to 29 extended-function timers

 32-bit GPTW (4 channels)

 16-bit TPUa (6 channels), MTU3a (9 channels)

 8-bit TMRa (4 channels), 16-bit CMT (4 channels), 32-bit CMTW (2 channels)

■ 12-bit A/D converter  Two 12-bit units (8 channels for unit 0; 21 channels for unit 1)

 Self diagnosis, detection of analog input disconnection

■ 12-bit D/A converter: 2 channels

■ Temperature sensor for measuring temperature within the chip

■ Encryption functions (optional)  AES (key lengths: 128, 192, and 256 bits)

 Trusted Secure IP (TSIP)

■ Up to 182 pins for general I/O ports

 5-V tolerance, open drain, input pull-up, switchable driving ability

■ Operating temp. range

 D-version: –40C to +85C  G-version: –40C to +105C

Flash Memory: 4MB, SRAM: 1MB With Trusted Secure IP

Flash Memory: 2MB, SRAM: 1MB

Related Popular Microcontrollers IC:

RX66N,R5F56 6N NDDBD,R5F566NNDDFC,R5F566NNHDFC,R5F566NDDDFC,R5F566NDHDFC,R5F566NNDDFB,R5F566NNHDFB,R5F566NDDDFB,R5F566NDHDFB,R5F566NNDDFP,R5F566NNHDFP,R5F566NDDDFP,R5F566NDHDFP,R5F566NNDDBD,R5F566NNHDBD,R5F566NDDDBD,R5F566NDHDBD,R5F566NNDDBG,R5F566NNHDBG,R5F566NDDDBG,R5F566NDHDBG,R5F566NNDDLK,R5F566NNHDLK,R5F566NDDDLK,R5F566NDHDLK,R5F566NNDGFC,R5F566NNHGFC,R5F566NDDGFC,R5F566NDHGFC,R5F566NNDGFB,R5F566NNHGFB,R5F566NDDGFB,R5F566NDHGFB,R5F566NNDGFP,R5F566NNHGFP,R5F566NDDGFP,R5F566NDHGFP,R5F566NDDBD,R5F566NNDGBD R5F566NNDDBD#20--- LPC1788FBD208
R5F566NNDDFP#30 ---- LPC1763FBD100

RX66N MCU GROUP-Outstanding Real-Time Performance:

This 32-bit microcontroller is ideal for real-time applications such as general-purpose inverters and IoT gateways. RX66N delivers outstanding real-time performance with the RXv3 core operating at 120MHz and has industry's largest and fastest class on-chip memory. Hence, RX66N supports various functions such as HMI, networking, and security required for industrial and consumer equipment on a single chip, contributing to smaller enclosure and shortened development time.

Features:

120MHz RXv3 core, Double-precision FPU, Register bank save function accelerating interrupt response

■ 4MB flash memory (120MHz read access, Dual bank function), 1MB SRAM

■ 182 general-purpose input/output (GPIO) ports

■ Ethernet, SD host I/F, USB 2.0 full speed, 3ch CAN, QSPI

■ TFT LCD controller supporting WVGA, 2D drawing engine, Serial sound I/F, CMOS camera I/F

■ Encryption engine (AES, TDES, RSA, ECC, SHA, TRNG), Key management, Flash memory protection function

Environmental & Export Classifications

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.