Add to Cart
Conductive Shielding Copper Foil Tapes for MRI RF Faraday Cage Installation
Product description
Double-sided Conductive means both sides of this tape will carry
current so whether it's soldering, grounding or minor repairs, our
tape will do the job, and do it well.The tape is also ideal for
transformer, mobile phone, computer, PDA, PDP, and LCD monitor, PC,
copier etc
[EMI SHIELDING]– If you want to protect your small electronics from
electromagnetic interference, our highly conductive tape is the
quick and easy solution
[BE ATTENTION !!!] – Safety overrides all else , i hope you guys do
it carefully no matter where the tape will be used in
Specification of 0.1mm thickness
Specification(0.1mm thickness) | |||||
Item | Unit | Specification | Texting Standard | Texting Method | Others |
Copper Thickness | u50 | 50± 3 | |||
Basis Weight | g/ m2 | 160 | 160± 10 | ||
Copper Foil | % | 99.95 | 99.95 | ||
Glue Thickness | u | 35 | 35+ 3 | ASTM- 1000 | |
Composition | ----- | Acrylic glue | Acrylic glue | ||
Total thickness | u | 60 | 60+5 | ||
Steel Adhesion | kg/ 1" | 0.8 | 0.8 | ASTM- 1000 | Initial adhesion tester |
Initial Adhesion | kg/ 1" | 1 | 1 | J.DOW | Electronic Stripping Tester |
Rentention(cohesion) | kg/ h | 48 | 48 | PSPC-7 | Viscosity Tester |
Weather Resistance | ℃ | minus10- 120℃ | minus10-120℃ | ||
Inventory Condition | ----- | ----- | temperature:25℃ | ||
RH:65% | |||||
Insulation Resistance | Ω | 0.01- 0.06 | 0.01-0.06 | ||
Inventory Validity | 6 month | |
The purity of copper foil is higher than 99.95%, and its function is to eliminate electromagnetic(EMI) interference,
isolate electromagnetic waves on the human body injury, and avoid unwanted voltage and current without affecting functionality.
In addition, electrostatic discharge after the ground has a good effect.
Paste strong, good electrical properties, according to customer requirements cut into a variety of specifications.