SMS SMMS SMMSS S SS SSS pp Non Woven Fabric Production Line

SMS SMMS SMMSS S SS SSS ppNon Woven Fabric Production Line

Cloth making machine for automatic production of non-woven film. The spinning head adopts hanger flow model design and optimization, and the melt is evenly distributed. The equipment adopts in-line cutting and automatic low-winding technology to serve the resources and improve the production efficiency. Balanced pressure without crushing or binding fibers, no holes, no blind angles, and fast, color transitions. Mill used. Dc motor universal joint transfer, roller using super laser drilling technology, to ensure the same temperature, no hair filling.

Application:

This is filament polypropylene fiber spunbond non-woven equipment. The material is polypropylene (PP), which uses the principle of spinning artificial fibers. During the polymer filamentation process, continuous filaments are extended into a network of fibers, which are finished by mechanical hot pressing. The mechanical assembly we adopt is the advanced single-side whole groove air extraction process, the whole process from feeding to cloth output is automatic control, short production process, high production efficiency. Non-woven fabric has high strength, softness, good, non-toxic, antibacterial, corrosion resistance, high tensile strength, high elongation, widely used in clothing, decorative materials, medical and health materials, daily life products and industrial and agricultural fields. In addition, the production line can also produce non-woven fabrics of different colors, different grams and different production lines according to the requirements of users.

Process Flow:

Feeding(suction, dosing, and mixing) → Melt and extruding(with recycling extruder) → Filtering → Metering → Spinning → Quenching → Air drawing → Forming → Calendering → Winding → Slitting → Product.

Spunbond nonwoven production line componests:

Edge material screw and recovery device →Screw extruder → Filter → Measureing pump → Monomer suction device → spinning box ( Enka / Carson Spinneret ) → Cooling air box → stretching device → Netting machine → hot rolling mill → winding machine → slitting Machine .

Flow chart of spunbond production process .

Additives (recycling of scraps )→ Raw material → Melt extrusion → Filtration → Measurement → Spinning → cooling → Stretching → Netting → Hot Rolling → Rewinding → Slitting → Finished Product

With a spinneret of 0.45mm hole diameter , the viscous polymer solution is transformed into a trickle with a specific cross-section through the micro pores, and solidified by the coagulation medium to form filaments

Stretching Unit

The stretching device including up stretching and down stretching unit, the function is drawing spinning, flaments into web forming by air.

1.Efficiently strentching with less energy consumption.

2.Evenly spinning filaments with less difference

3.Closed system with easy concrol

HHM Spunbond Series Nonwoven Machines is suitable for PP (polypropylene) spunbond nonwoven fabric making, it used PP chips as raw materials input, undergoes the process of extrusion, spinning, quenching, closure air stretching, web forming calendering, winding and cutting as per requiremnets and then packed for storage and delivery.

key component

Parts of spunbonded nonwoven fabric production line:

Recycle extrude→Main extruder→Filter→Metering pump→Monomer suction device→spinning box( Changzhou/ENKA/KASEN spinneret )→Quenching air chamber→stretching device→Web former→Calender→Winder→Slitter

Parts of Melt blown nonwoven fabric production line:

Main extruder→filter→Metering pump→Air heating system→Melt blown sprayer (ENKA sprayer)→Web former→Winder→Slitter

Technical process

Spunbonded process and technical flow chart:

Additive(Recycling off-cut fabric)→Raw material→Melting→Filtering→Measuring→Spinning→Cooling→Stretching→Web forming→Calendering→Winding→Cutting→Final product

Melt blown process and technical flow chart:

Raw material →Melting→Filtering→Measureing→Air heating→Spraying→Web forming→Winding→Cutting→Final product

Precisely CNC center hold machine parts beyond customer request

shipping and delivery

FAQ

Q.1.ARE YOU A MANUFACTURER OR TRADING COMPANY?

● HHM is a manufacturer with trading company who is registered in the Chinese Business Administration and has the right to operate and sell it legally.
● HHM cooperates with Alibaba who will supply you a lot of service to protect you .
● HHM has a professional engineer team who all have more than 25 years experience in plastic extruder and recycling machine manufacturing .

Q.2.HOW TO VISIT OUR FACTORY?

● If you are interested in our products, you may visit our factory at any time , we can pick you up from the station(Chuzhou
Railway Station) or the airport (Nanjing or Shanghai ) near our city .
● Seeing is believing , you can see our machine quality after your visit .

Q.3.HOW TO ENSURE THE MACHINE QUALITY?

● In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
● Each component before assembly needs strictly control by inspecting personnel.
● Before shipping, the whole machine will be commissioned in our factory to make sure it can run well in your factory.


Q.4.HHM AFTER-SALE SERVICE

● We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
● When you finish the preparation conditions,our fast and professional after service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
● We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
● We provide 1 year warranty with spare parts free and life-long technical support .

CHUZHOU HH Non Woven Technology CO.,LTD is professional in manufacturing and selling PP spunbonded and meltblown nonwoven fabric making machine.

With the stable quality and easy operation of the nonwoven production line, our regular product includes single beam, double beam, SSS, SMS, SMMS, SSMMS and etc., regular width is 1600mm, 2400mm, 3200mm,4000mm,4200mm;

Varies applications for shopping bags, home decoration, medical area, hygiene area, agricultrue, and etc.

We have good reputation in spunbond area not even in China but also in other country, we have supplied to China domestic, India, Pakistan, Turkey, Russia, Australia, and etc.

We insist on customer-focused, quality-first, best after-sale service, expecting the cooperation with you.

1) The whole line is well-structured and easy to operate.

2) The whole line is highly automated.

3) Control elements are of well-know make, high performance and reliable technologies.

4) The whole line are controlled by PLC and operated with touch-screen.

5) The allocation of the main frame and auxiliary equipment can be special designed and adjusted according to customers requirement.

Features:

1)It is featured by lower investment, compact construction, small area, simple production technology, simple operation, saving of labor and widely compatibility and so on.

The equipment produces non-woven fabric with polypropylene(PP), adopts the technology of formating the web by negative pressure, make into PP spun-bonded non-

woven fabric, the product is featured by uniform cover, great intensity, good ventilation and good feeling and so on. It has been in wide use in medical clothes, package and architecture and so on.

2)The lower investment can reduce some unnecessary additional auxiliary facilities, and under the conditions of guaranteeing the technology requirement and safe production, can reduce the cost of the manufacture, so that we can reduce the investment lower.

3)Its easy and reliable to making technics adjustment, the line adopts the method of computer controlling assistant systems combines with human control to make the technics adjustment become more easier and reliable, and the machine can adapt to different raw materials to gain more widely usage.

4)The requirement of the workshop and equipment is very simple, it reduces the fixed assets investment, and efficiently take the advantage of the room of the platform, and enlarge the utilization of the workshop and the steel platform.

5) More specialty in processing the main equipment increasing the procession precious and capacity of the machine, this reduces the manufacture cost and to undertake the quality of the product more well.

APPLICATION:

Medical Protect

Surgical gown&cap, patient clothes, bed sheet, pillow covers, face mask, glover, diaper, Shoe cover, curtains, etc.

Sanitary and Health

Baby diaper, feminine hygiene, hygiene pad, baby training trouser, incontinence pads. etc. Cover of the high absorbent material after hydrophilic treatment, diaper edge for preventing Leaking. Diaper backing after composite with other material etc

Packing and Industry

Shopping bag, tarpauins, tents, bag for rice/sugar, luggage, vacuum cleaner bag, buff pad, Interlining and cloth, shoulder padding etc.

Argriculture:

Cover tree, cope cover, garden cover etc.