Automatic Hot Splicing Rubber 1400mm Conveyor Belt Jointing Machine With EA BEAM
Brand Name:RUNNING
Certification:CE
Model Number:ZLJ-1400*830
Minimum Order Quantity:1 set
Delivery Time:7 work days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Site Member
Location:
Qingdao Shandong China
Address:
Jiaonan Development Zone Industrial Park Qingdao City,Shandong P.R.China 266400
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
1400mm Rubber Conveyor Belt Automatic Hot Joint Vulcanizing Machine
Hot vulcanising method
The hot vulcanising method utilises heat and pressure to mend sections of a conveyor belt. Hot vulcanisation splices are heated and cured under pressure with a vulcanising press. The damaged portion of belt is carefully trimmed or removed. A new section repaired and bonded in place using cement or other adhesives. The hot vulcanising method is optimal for holes, cuts and tears in belt covers, steel cords and fabric.
Why to choose our conveyor belt jointing machine?
1. EA BEAM
2.
- Pressure bolts pass through the cross beam profile for a high level of safety
l Tension bolts made of high-strength steel, however, 2 kg less apiece than conventional steel tension bolts.
- Tension bolt threads protected against damage
- Tension bolts sealed up and protected against pollution
3. Lightweight aluminum platens use new rapid cooling system within platens.
4. Custom sizes, rectangular configurations and multiple platen arrangements are also available on request.
5. Control Box
With automatic temperature control, security alarm and automatically switch off the power. The control box can monitor the temperature of 3-5 different points on each heating platen at the same time to ensure the result of jointing.
6． Pressure bag system, can used for both water and air, one time molding, without metal frame, light weight, testing pressure out of our factory is 2.5MPA (old design pressure bag fixed with metal frame and bolts, heavy weight)
7. Pressure System
Automatic mute pressure pump own the features as smaller size, lighter weight and high impact-resistance. Compared with the manual pump, the operating pressure can be 23kg/cm2 (2.3MPa).
8.Heating Platen
Custom extruded plank, silicone heating elements (up to
180°C/356°F), and durable composite insulating packaging are used
to construct a flexible platen that contours to belt
irregularities.
It takes 15~25mins rise up to vulcanizing temperature (about
145°C).
The flush "quick connect" make smooth profile. Recessed power
connections are sealed for moisture resistance.
Main Parts & Fittings
ZLJ conveyor belt vulcanizing machines can be used by one or multiple combinations according to the joint length of the belt.The main configuration of a single vulcanizing machine is as following:
| Name | Amout |
| The whole machine | 1 set |
| Stab a wrench | 2 piece |
| Clip tight device | 1 set |
| Electricity controls box | 1 set |
| A cable | 1 root |
| Two cable | 2 root |
| Hot electric resistance | 2 root |
| SD hand press pump (from choose) | 1 set |
| Pressure pipe | 2 root |
| Cold water system(can choose) | 1 set |
Shipping package of conveyor belt jointing machine
There is a lot of other machines for your choice, please feel free
to contact us if you need more machine details.
Automatic Hot Splicing Rubber 1400mm Conveyor Belt Jointing Machine With EA BEAM
Inquiry Cart
0