RVP-E Series Water Cooled Rubber Flat Belt Splicer Sectional Conveyor Belt Vulcaniser

RVP-E Series Sectional Type Water-Cooled Rubber Belt Splicer

What’s RVP-E series and what it can do:

The RVP-E sectional has uniform pressure bag and aluminum/steel bolt and high-grade aluminum platens and beams with high safety grade.

This belt joint/splice system designed to be portable and easy to set-up and remove from the site. We can manufacture to all sizes and pressure up to 1.8 Mpa or more required for different fabric belts and steel-cord belts.

Sectional Vulcanizing Press RVP-E

New type Vulcanizing Press with E type cross beam, one kind of heavyweight vulcanizer, use new design components, include flexible pressure bag, traverse bars with standard heating platen and controller. Learn from Canada brand similar products.

TECHNICAL PARAMETERS

• Water pressure bag (also can use air pressure) Press for 100PSI, 200PSI etc. surface pressure for textile and steel cord belts, Up to 1.8Mpa/2.0Mpa.
• Available in rectangular shape 90°, rhombic 16° 42‘ or 22°
• Uniform pressure distribution by means of the pressure bag
• 200 p.s.i. (14 kg/cm sq.) units usually used to do steel cord conveyor belting
• Different heating platen size and combination.
• Water-free is used as the pressure medium
• Pressure regulation up to max. 70 N/cm² (7 bar/100 PSI)
• Short heating-up time
• Water cooling system equipped with extruded cooling channels for short cooling-down time
• Optimized pressure and temperature distribution

• Degree of the heating platen: 22 degree bias angle or 16 degree, 20 degree, rectangle and other degree is optional.
• Power Voltage: 380V. 660V. 525V480V. 440V. 415V. 400V or 220V
• Vulcanizing temperature:145℃ (adjustable 0~200℃)
• Temperature-rising time (from normal temperature to vulcanizing temperature): no more than 25 min, accords to different conditions, actually, normal conditions, is around 20 mins.
• Improved cooling system, when use pressure pump for cooling, cooling time only 5mins (cooling from 145 to 75 degrees)

200 PSI(14kg/cm sq.) units suitable for splicing steel cord conveyor belting.

Note:

• Specifications are subject to change without notice;
• Build-in cooling standard on all units;
• Total weights include electrical control panel, cable set and set up templates for all models;
• 200 PSI models include fluid pressure pump and reservoir unit Model HPP20-4(mandatory for operating pressure above 100PSI/7 kg/cm sq);
• Temperature adjustable between 0-199deg.C;
• Sectional vulcanizers are built on a 22 degree bias, 16/20 or other degree are optional;
• Custom sizes, rectangular configurations and multiple platen arrangements available on request.

*********************************************************

When order, pls supply below information, our technician will make a solution for you, or pls choose one model from bottom traditional sizes table

• Max belt width
• Heating platen length (or pls supply belt manufacturer’s recommended splice length)
• What kind of belt, light duty belts or heavy duty belts, belt model No.
• Working Voltage
• Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is 1.2Mpa, for steel cord belts is 1.4Mpa)
• Degree of heating platen (standard will be 22 degree)

Normal vulcanizer model sheet:

A= Splice Length
B= Bet Width
C=Length of platen along the belt
D= Width of platen
measured square to beltline
E= Bias Ange
F=Width of platen along the belt on bias

Main Componets:

• Bars are available in various profiles and lengths to provide a custom solution for your needs
• Bars are specially designed for running machine and manufactured out of quality extruded aluminum
• Various bolt and nut styles complement each bar type and provide a secure, pressurized splice

EA BEAM

2.

• Pressure bolts pass through the cross beam profile for a high level of safety

l Tension bolts made of high-strength steel, however, 2 kg less apiece than conventional steel tension bolts.

• Tension bolt threads protected against damage
• Tension bolts sealed up and protected against pollution

3. Lightweight aluminum platens use new rapid cooling system within platens.

4. Custom sizes, rectangular configurations and multiple platen arrangements are also available on request.

5. ELECTRONICS CONTROL CABINET

• Design of required control cabinet depends on number of heating plates
• Exact temperature measurement inside of heating plates via double PT 100, digital display of set point and real value temperature
• Quick programming of electronic temperature controllers
• Voltage monitor for protection against over-voltage

• In case of electronic control failure switch to manual operation mode
• Digital automatic timer
• Monitoring of differences between the single heating circuits +/- 2.5 K
• Optical signal shows end of vulcanizing time
• Minimum protection class IP 44