3406 3406B Used Engine Blocks For Excavator E245B 152 - 7648 Water Cooling

Brand Name:Caterpillar
Model Number:3406
Delivery Time:5 - 8 work days
Payment Terms:D/P, T/T
Place of Origin:USA
Price:Negotiated
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou China
Supplier`s last login times: within 47 hours
Product Details Company Profile
Product Details

3406 3406b Used Engine Blocks For Excavator E245B 152 - 7648 Water Cooling


Specification


Car name: Engine cylinder block
Model Number: 3406
Engine type: Diesel
Application: Excavator
valve: 12 valve
The number of cylinder: 6
Injection: Eddy
Cylinder stroke: 165.1
Cylinder diameter: 137.2

Description


How to Clean Inside an Engine Block


If your car's engine has accumulated dirt, sludge and grease over the years, you may need to clean the inside of the engine block. Without proper cleaning, this accumulation can damage cam shaft bearings, crank shaft bearings and lifters. It can also block the oil galleries, restricting oil access to the vital parts of your engine. Cleaning the inside of an engine block is a difficult job that must be performed with the engine out of the car and mounted on an engine stand. After cleaning and reinstalling the engine in your car, you will notice an improvement in your engine's performance.


Step 1
Mount the engine to an engine stand and connect the power washer or garden hose to a hot water source.


Step 2
Spray the engine block down with engine degreaser allowing it to soak in for the amount of time designated on the product label.


Step 3
Loosen built-up dirt and grime on the engine block with a stiff-bristled brush. Spray brake parts cleaner into the oil galleys, freeze plug holes, lifter bores and cylinder bores to loosen the accumulated grease.


Step 4
Scrub the engine block with the stiff-bristled brush, laundry soap and hot water while maintaining a constant flow of water over the engine to prevent rust. Use soft rags to clean the cylinder bores and smaller brushes to clean out the lifter bores and oil galleries.


Step 5
Dry the inside and outside of the block by spraying with the air compressor. Add another coat of lubricating oil spray.

Apply automatic transmission fluid to paper towels and wipe the cylinder bores to clean them.


Step 6
Rinse all soap from the engine block and immediately coat all interior and exterior surfaces of the engine block with a lubricating oil spray to prevent the rusting process. Spray the inside of the block, cylinder bores, lifter bores, oil galleries, bearing journals and saddles.


China 3406 3406B Used Engine Blocks For Excavator E245B 152 - 7648 Water Cooling supplier

3406 3406B Used Engine Blocks For Excavator E245B 152 - 7648 Water Cooling

Inquiry Cart 0