Product Details
New Swine Flu Antigen Rapid Test Cassette (Nasal Swab), detection
of New Swine influenza virus G4 EA H1N
| Product Name: | New Swine Flu Antigen Rapid Test Cassette (Nasal Swab), Detection
Of New Swine Influenza Virus G4 EA H1N |
| Principle: | Chromatographic Immunoassay |
| Specimen: | Nasal Swab |
| Pack: | 10 T |
| Shelf Life: | 24 Months |
| Specificity: | 96.36% |
| FEATURES 1: | Fast Results |
| FEATURES 3: | No Equipment Required |
| FEATURES 5: | High Accuracy |
| Cat No.: | VINSF-502 |
| Format: | Cassette |
| Reading Time: | 15 Minutes |
| Storage Temperature: | 2-30°C |
| Sensitivity: | 97.50% |
| Accuracy: | 96.67% |
| FEATURES 2: | Easy Visually Interpretation |
| FEATURES 4: | Simple Operation |
APPLICATION
The New Swine Flu (G4 EA H1N1) Antigen Rapid Test is an in vitro
diagnostic test for the qualitative detection of New Swine
influenza virus (G4 EA H1N1) in Nasal swab samples, using the rapid
immunochromatographic method.
PRINCIPLE
The New Swine Flu (G4 EA H1N1) Antigen Rapid Test is a qualitative,
lateral flow immunoassay for the detection of New Swine Flu virus
(G4 EA H1N1) in swine’s Nasal swab samples. In this test, antibody
specific to the New Swine Flu is coated on the test line region of
the test cassette. During testing, the extracted specimen reacts
with the antibody to New Swine Flu that is coated onto particles.
The mixture migrates up the membrane to react with the antibody to
New Swine Flu on the membrane and generate one colored line in the
test region. The presence of this colored line in test region
indicates a positive result. To serve as a procedural control, a
colored line will always appear in the control region if the test
has performed properly.
DIRECTIONS FOR USE
Allow the test, specimen, extraction buffer to equilibrate to room
temperature (15-30 °C) prior to testing.
1. Remove the test cassette from the sealed foil pouch and use it
as soon as possible. Best results will be obtained if the assay is
performed immediately after opening the foil pouch.
2. Collect nasal swabs from acute hyperthermia and untreated sick
pigs. The swab should be inserted into the nostril and rotated on
the inner wall 5-10 times to collect virus as much as possible.
Withdraw the sterile nasal swab from the nostril.
3. Remove the cover of the tube containing the extraction buffer.
See illustration 1. Place the tube in the workstation.Place the
swab specimen in the extraction tube. Rotate the swab for
approximately 10 seconds while pressing the head against the inside
of the tube to release the antigen in the swab. See illustration 2.
4. Remove the swab while squeezing the swab head against the inside
of the extraction tube as remove it to expel as much liquid as
possible from the swab. Discard the swab in accordance with local
biohazard waste disposal protocol. See illustration 3.
5. Tighten the extraction tube cap on top of the extraction tube.
Hold the specimen collection tube upright then unscrew the cap of
the specimen collection tube. See illustration 4.
6. Invert the specimen collection tube and add 3 drops of the
solution (approx.120 μL) to the sample well and then start the
timer.
7. Read the result at 15 minutes. Do not interpret the result after
20 minutes.
PRECAUTIONS
Do not use after expiration date.
Handle all specimens as if they contain infectious agents. Observe
established precautions against microbiological hazards throughout
testing and follow the standard procedures for proper disposal of
specimens.
Wear disposable gloves and eye protection when specimens are being
tested.
Humidity and temperature can adversely affect results.
Do not remove test cassette from its pouch until immediately before
use.
Do not reuse the test kit.
Do not mix components from different lot and different products.
Company Profile
HANGZHOU ALLTEST BIOTECH CO.,LED has a solid foundation with
top-notch industry professionals, having proven expertise in
innovation management including new introductions, be it a product
or be it industry transforming process developments. We have been
witness to as well as been part of core teams that have been
responsible for transformations, which are critical today’s Rapid
Tests as well as POCT business.
Some of them include industry-leading design control systems that
are responsible for innovative products with high quality as well
as validations protocols that form the core of stringent quality
assessment systems.
HANGZHOU ALLTEST BIOTECH CO.,LTD has been created with the sole
objective of benefitting the stakeholders in healthcare industry
with major stake in POCT business including rapid tests.
HANGZHOU ALLTEST BIOTECH CO.,LTD is committed to bring Innovative
Solutions including convergence of rapid test’ ease with the power
of modern day electronics, thereby helping the creation of new
technological platforms as well as business processes that unlocks
the true potential of amalgamation of technology and commerce with
new milestones in techno-commercial sectors of POCT industry.
In a nutshell, with HANGZHOU ALLTEST BIOTECH CO.,LTD, you can
“Relax” and leave the worries of today and tomorrow with better
solutions for you than solutions available today.