

Add to Cart
Minimium Spangle 0.12mm-6.0mm Thickness Sheet Metal Galvalume Steel Coil
Hot-dip galvanizing is generally used for steel strip or wire (stranded wire). The steel surface is covered with zinc layer to prevent the erosion of the atmosphere, and to ensure the service life of the substrate. Moreover, zinc is more active than iron, and can also sacrifice zinc layer to protect the steel matrix in the case of corrosion. Aluminized zinc has stronger protective effect and better corrosion resistance than galvanized products. The whole structure consists of aluminum, iron, silicon and zinc, forming a dense tetrad crystal, which forms a barrier on the steel plate, thus effectively preventing corrosion factors from penetrating. Corrosion resistance comes from aluminum's barrier layer protection function, and zinc's sacrificial protection function. Aluminum forms an insoluble oxide layer that acts as a barrier when zinc sacrificial protects the cut edges, scratches and scratches of the coating. As for the difference in use, if galvanized products can not prevent corrosion, you can further choose aluminum zinc plating.
Aluminized zinc color coating plate is a new material produced by
high-end application in China in recent years, often referred to as
CCLI. It is made of aluminized zinc plate (55% aluminum, 43% zinc
and 1.6% silicon) which is more corrosion resistant than zinc
plating, after surface degreasing, phosphating and complex salt
treatment, coated with organic coating and baked.
Aluminized zinc color coated plate (AZ150,G345A,PVDF) is very
suitable for construction or other facilities in extreme
environment, very corrosion and weather resistance, and this steel
plate can guarantee more than 20 years of service life.
Ordinary color steel coil is a kind of composite material, also
called color coating steel plate is made of strip steel in the
production line after continuous surface degreasing, phosphating
and other chemical transfer coating treatment, coated with organic
coating by baking products. Both steel and organic materials have a
little bit. Not only the mechanical strength of steel plate and
easy molding performance, but also the good decorative organic
materials, corrosion resistance.