100 Bar Precision Pressure Transmitter 302 SS 100KPa 0.4% FS

Dwyer differential 302 SS 15 psi (100 kPa) ±0.4% FS pressure transmitter 677b-12 pressure transmitter 100bar

Series 677B Differential Pressure Transmitters are designed to measure pressures as low as 0.1 in w.c. with ±0.4% accuracy. Use Series 677B for building energy management systems, environmental pollution control, oven pressurization, lab and fume hood control, HVAC and VAV applications. The transmitter features 15 psid overpressure, reverse polarity protection and EMI/RFI protection. Internal regulation permits use with unregulated DC power supplies. The NEMA 4 housing allows for versatile mounting locations and integral mounting tabs simplify installation

Specification

Mounting Series 677B is designed for mounting by using the two (2) slots (suitable for #6 and #8 screws) that are provided on the mounting baseplate. For optimum performance, isolate the instrument from vibration and provide relatively clean, dry air to the pressure ports. Note: Even though there is no flow through the 677B, a filter is located in both the high and low pressure ports for use in extreme dust or moisture conditions. In most applications, preferred installation is with the baseplate mounted vertically and located on a flat surface in a junction box or attached to a nearby beam. Quick and easy field replacement is possible by removing the two case screws that hold the housing to the baseplate and lifting the housing free. The baseplate will remain mounted and can be used with the replacement units housing

Electrical The Series 677B is a two (2) wire circuit (+SUPPLY, -RECEIVER) with a 4 to 20 mA output. The unit is calibrated at the factory using a 250 ohm load at 24 VDC.

WIRING DIAGRAM FOR 677B SERIES

Calibration

The 677B series is factory calibrated and should require no field adjustment. However, the zero adjustment is provided near the screw terminal strip. Whenever possible, any zero and/or span offsets should be corrected by software adjustment in the user’s control system. Use the zero and span adjustments on the 677B series only if absolutely necessary. The 677B series is calibrated in the vertical position at the factory (baseplate vertical). For use in any other orientation, position the unit and follow the adjustment procedure listed below. If a change in range is needed, contact the Customer Service Department for a replacement in the appropriate range.

Zero Adjustment

While monitoring the current output with both pressure ports open to atmosphere, the zero may be adjusted. For unidirectional pressure changes, turn the zero adjustment screw until a reading of 4 mA (± .16 mA) is achieved. For bidirectional ranges, set the zero to 12 mA (± .16 mA).

MAINTENANCE

Upon final installation of the Series 677B Transmitter, no routine maintenance is required. The Series 677B is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Mengchuan Instrument Co., Ltd. is located in Liushi Town, Yueqing City, Wenzhou, Zhejiang Province, surrounded by the beautiful world natural and cultural heritage - Yandang Mountain! It is mainly engaged in 2000 differential pressure gauge, red oil differential pressure gauge, pressure differential pressure transmitter, liquid level transmitter, diaphragm pressure gauge, shockproof pressure gauge, electric contact pressure gauge, stainless steel pressure gauge, precision pressure gauge, micro pressure capsule gauge, floating ball liquid level gauge, floating ball switch, liquid level controller, intelligent energy gauge, light column gauge and other products. The products are widely used in machinery and civil industries such as plastics, food, printing, chemical industry, petroleum, medical treatment, oven, light textile, printing and dyeing, air conditioning, family and so on.

The company adheres to the business philosophy of "customer first, forge ahead" and adheres to the principle of "customer first" to provide our customers with high-quality services. Welcome!