Fusion Of Cutting-Edge Innovative Technologies - Thermal Control Star Showing Extraordinary Phase Change Properties At 45 °C And Escorting Aviation Safety: 45 °C Military Aviation PCM

Fusion Of Cutting-Edge Innovative Technologies - Thermal Control Star Showing Extraordinary Phase Change Properties At 45 °C And Escorting Aviation Safety: 45 °C Military Aviation PCM

The basic working principle of the product:

• When the ambient temperature is lower than 45℃, the phase change material is in a solid state, and the internal molecular arrangement is relatively regular and tight, and the intermolecular force is strong.
• As the ambient temperature gradually rises and approaches 45 °C, the material molecules begin to absorb heat, and the thermal motion of the molecules is intensified, gradually breaking the original intermolecular force and lattice structure, and then beginning to transform from solid to liquid.

Basic features of the product:
1. Precise phase transition temperature

• The phase transition temperature of this kind of phase change material is accurately controlled at about 45℃, which makes it able to accurately carry out phase transition in a specific temperature range, so as to achieve precise control of temperature.
• This precise phase change temperature characteristic is critical for military aviation equipment, which requires extremely high temperature control and requires materials to function stably at specific temperature points.

2. Good thermal conductivity

• It has good heat conductivity and can quickly absorb and release heat. This enables the phase-change material to respond quickly when the temperature changes, and to carry out the phase transition in time, improving the efficiency and timeliness of temperature control.
• Good thermal conductivity can also ensure that the heat is evenly distributed inside the material, avoiding the occurrence of local temperatures that are too high or too low, further improving the effect of temperature control.

3. High chemical stability

• In the military aviation environment, it will be exposed to various chemicals, such as fuel, lubricating oil, hydraulic oil, etc., and may also be affected by harsh environmental factors such as high humidity and strong radiation.
• 45℃ military aviation phase change materials have high chemical stability, can withstand the erosion of these chemicals, and maintain the stability of its performance under harsh environmental conditions, not easy to decompose, metamorphic and other chemical reactions.

4. Good reversibility

• The phase transition process has good reversibility and can be carried out several times under the condition of repeated temperature changes, and the performance of each phase transition changes little.
• This ensures the reliability and stability of phase change materials in the long-term use process, and can meet the requirements of military aviation equipment for long life and high reliability of materials.

Common application scenarios:
-- Missile launch systems (in the context of military aviation)
1. Temperature control of launcher

• The missile launcher will generate a lot of heat during operation, especially in continuous launch or high temperature environment.
• 45℃ military aviation phase change materials can be used in key parts of the launch device, such as guide rails, electrical control units, etc.
• When the temperature is close to 45 ° C, the material absorbs heat to ensure that the temperature of the launcher is within the safe range to prevent the accuracy and reliability of the missile launch from being affected by excessive temperature.

2. Heat dissipation of electronic guidance system

• The electronic guidance system of the missile is sensitive to temperature, and overheating will lead to signal transmission errors and guidance accuracy decline.
• The application of phase change materials in the cooling structure of guidance system can absorb heat and ensure the normal operation of guidance system when the temperature rises to 45℃, which is of great significance for improving the hit rate of missile.

-- UAV power system and equipment bay
1. Motor and battery temperature regulation

• In military drones, motors and batteries are key components.
• The motor will heat up at high loads, and the battery will also generate heat during charging and discharging.
• The phase change material is used in the motor housing and battery compartment, when the temperature reaches 45 ° C, the material absorbs heat, prevents the motor from overheating and damage, while extending the service life of the battery, and improving the endurance and flight safety of the UAV.

2. Onboard equipment cooling

• The onboard equipment of the UAV (such as the flight control system, communication equipment, etc.) also needs to work within the appropriate temperature range.
• 45℃ military aviation phase change materials can help maintain the temperature stability of these equipment, avoid equipment failure due to high temperature, and ensure the normal flight mission of the UAV.

Matters needing attention:

• This product is not edible.

• Sichuan Aishpaier New Material Technology Co., Ltd. (referred to as "Aspaier"), formerly known as Chengdu XHHC Biotechnology Co., Ltd., has been involved in the technical research and development of hot and cold materials since 1997.
• In 2013, it settled in Haowang, Cheng-A Industrial Concentration Zone. Electromechanical New Materials Industrial Park is located at A7-8, Haowang West Road, with a workshop area of ​​5,000 square meters and an office building of 800 square meters.
• Research - production - sales of ice packs, incubators and new phase change materials, and has won more than 30 invention patents and utility model patents so far. Bomer resin (including Carbomer 371, Carbomer 676, Carbomer 940, Carbomer 980), thickeners, gelling agents, cold storage ice bags, ice packs, refrigerants, cooling agents, incubators, cold chain box products.
• It also provides supply and technical guidance of intermediate pharmaceutical excipients, as well as the cold chain of goods Packaging, cold storage storage, cold storage packaging, cold storage distribution, cold storage technology research and development, cold chain verification, program formulation, temperature and humidity detection and other comprehensive temperature control, monitoring and management cloud platforms, as well as cold chain logistics and distribution services.

• The company was rated as a high-tech enterprise in 2016, realizing technological innovation, and deeply integrating technology and applications. In 2017, the company launched warehouse, storage temperature and humidity intelligent monitoring system, video intelligent monitoring system, power room environment monitoring system, flooding One-stop smart product lines such as sensor series; at the same time, cold chain verification will be launched in 2020 to provide verification services for cold chain tools and equipment such as cold chain boxes, refrigerated trucks, and freezers.
• Its product application range covers industrial control, medicine, communication, agriculture, meteorology, electric power and other industries and application fields.
• Our products have the advantages of high accuracy, fast response time, good long-term stability, strong adaptability, and excellent quality.

• After passing the ISO9001 quality management system certification in 2018, the company strictly implements the quality management system. The tests that its products have passed include: Shanghai Chemical Industry Research Institute test report, national hazardous chemical test report, Swiss SGS content non-toxic safety test, Beite The company's REACH report, ROHS report, etc.
• With the joint efforts of all colleagues in the company, the products have been successfully sold to the United States, Germany, Ireland, Japan, South Korea and other countries and regions.

• All colleagues of "Aishpeier" will adhere to the core value planting concept of "customer first, continue to provide customers with solutions.", adhere to the idea of "continuous learning", take "continuous innovation" as the driving force for development, Scientific research technology, advanced production process, superior product quality and perfect service system to continuously meet the growing needs of customers, to be a sustainable high-growth enterprise.