DIN Standard 100mm Size 304 Fine Filter Net Flange End Y Strainer Valve

Usage:

This product is suitable for nominal pressure ≤1.6MPa, temperature 0 ° C ~120 ° C /0 ° C ~200 ° C water, ≤0.2MPa saturated steam, oil pipeline, can filter dirt, precipitation, rust and other debris in the medium.

Y-type filter is an indispensable filter device for conveying medium pipeline system. Y-type filter is usually installed at the inlet of pressure relief valve, pressure relief valve, water level valve or other equipment to remove impurities in the medium to protect the normal use of valves and equipment. Y type filter has advanced structure, low resistance, easy to discharge and so on. Y type filter applicable medium can be water, oil, gas.

The main part material

Connection size

Technical parameters

Principle of action

The valve is from the medium into the inlet, through the filter screen to achieve the purpose of filtering, from the outlet flow out.

Characteristics of valve

1. Simple shape, good manufacturing technology, wide range of application, easy to install.

2. Reasonable and compact structure, full appearance, in the work can filter the impurities in the medium.

3. The medium can flow from the direction of the valve inlet, filter through the filter screen, and flow out from the outlet to achieve the purpose of filtration.

Storage, installation and precautions

1. This product is installed on the pipeline for filtering sundries in the pipeline and protecting the normal operation of valves or equipment.

2. Bypass must be installed on the pipelines for installing the product.

3. Pipe and valve cavity should be cleaned before installation.

4. The valve shall not be subjected to large external forces after installation.

5. When the local minimum temperature is lower than 4℃, insulation protection should be taken; As the end valve should be used with pipe or jacket heating, to prevent the pipe wall temperature below 0℃.

6. It is strictly prohibited to install and use in the pipeline under vibration or the rapid change of medium temperature.

7. The product is usually installed at the inlet of the pressure reducing valve, hydraulic control valve and other equipment. The installation position should be 6-10 times the diameter of the protected valve, and the flow direction of the medium should be consistent with the arrow direction of the valve body; Otherwise, the filter function is not achieved.

Yuanda Valve Group Co., Ltd., founded in 1994, is headquartered in Yincun, Longyao, Hebei, China, the hinterland of Bohai Economic Rim surrounding Beijing and Tianjin. With a registered capital of RMB 200 million, Yuanda currently has 8 subsidiaries, of which 6 are in China and 2 overseas. Among them, the core company, which covers an area of 540,000m2 and has more than 3500 employees, is the largest high,midium and low-pressure valve manufacturing base specializing in valve development, manufacturing, and sales in China.

Yuanda has obtained DNV·GL, ISO9001: 2015、ISO14001:2015、OHSAS18001:2007, API6D（6D-0759）, CE, KS, and EAC certifications. Its""trademark is evaluated as Famous Trademark of China and Famous Brand in Hebei Province, and the product series produced under"" is a trademark registered in Korea and products produced under this trademark enjoy a good reputation in both international and domestic markets. Yuanda has been named “Credit Management AA-Rating Enterprise” by the General Administration of Quality Supervision, Inspection and Quarantine and granted the title of “China Quality Trustworthy Enterprise” by China Entry and Exit Inspection and Quarantine Association. It is also a holder of Manufacture License of Special Equipment Level A and Casting Certificates Grades B, B1, and B2, and a member of China Valve Association council, a corporate member of China Foundry Association, and a provincial enterprise technology center in Hebei. Yuanda has been granted the power to carry out import and export operations on its own and is an approved supplier of PetroChina (CNPC) and Sinopec, Guodian, Huaneng, Huadian, Datang and China Power, and China Aluminum, CCESCC, Shougang, Wuhan Iron and Steel Company, and Hebei Iron and Steel Company.

Yuanda manufactures to standards including GB/JB(china), ANSI, API, AWWA, DIN, BS, JIS, EAC, NF and so on, and uses HT200, HT250, QT400, QT450, WCA, WCB, WCC, CF3, CF8, CF3M, CF8M, 1Cr5Mo, LCB, among others, to produce a great variety of valves including gate valves, globe valves, ball valves, butterfly valves, check valves, diaphragm valves, pressure-relief valves, plug valves, and traps, which are available in 12 main categories, 200 series and 4000 specs, totaling 120,000 tons a year. These products are widely used in all civil sectors covering petroleum, petrochemical, chemical, power generation, metallurgy, water system, pharmaceuticals, urban construction, and water supply and drainage.