Product Details
Cold Peel DTF PET Film For Digital Inkjet Heat Transfer Printing
Dtf PET Film Advantage:
1. Super ink absorption
2. Shake powder clean
3. Colorful printing
Dtf PET Film Product Description
1. PET printing film is for DTF.
2. It is cold peel with double side matte and single side matte.
3.The glue will not open or break under the environment.
Dtf PET Film Physical Characteristics:
Keywords | PET Dtf Transfer Film |
Conventional Thickness | 0.075mm |
Conventional Length | 100m |
Conventional Width | 600mm |
Finished Product | 0.075mm*600mm*100m/roll |
Heat Press Temperature | 130℃-160℃ |
Heat Press Time | 8-15 seconds |
Pressure | 0.3-0.5mpa |
Washable Temperature | 45℃-60℃ |
Company Profile
Our company is currently equipped with two ultra-low temperature
freezer pulverizers imported from Germany, with an annual
production capacity of 6,000 tons of TPU powder. . Eight sets of
ultrasonic high-efficiency powder sieving machines can sieve TPU
hot melt adhesive powder with different particle sizes such as
0-80μm/80-200μm/150-250μm/200-400μm/400μm and above. The TPU hot
melt adhesive powder produced by the company has a Shore hardness
of 55A/65A/75A/85A, etc. And is widely used in heat transfer (DTF,
offset heat transfer), clothing, shoe materials, luggage, etc.
MAIN PRODUCTS
TPU hot melt adhesive powder
PES hot melt adhesive powder
PA hot melt adhesive powder
EVA hot melt adhesive powder
Double Side Matte DTF pet film
Singe Side Matte DTF pet film
Application:
It can be used all kind of fabric.
TPU hot melt adhesive powder product data
PES hot melt adhesive powder product data
PA hot melt adhesive powder product data