Factory 80GHz Aiti-crossion Radar Level Transmitter for Continuous Level Measurement with Explosion-proof and CE Report

Brand Name:NUOYING
Certification:CE, ATEX, SIL
Model Number:NYRD900
Minimum Order Quantity:1 pc
Delivery Time:5-7 working days
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Address: Block V5, Ronghao Industrial Town, Gaoling District, Xi'an City, Shaanxi Province
Supplier`s last login times: within 28 hours
Product Details Company Profile
Product Details

Factory 80GHz Aiti-crossion Radar Level Transmitter for Continuous Level Measurement with Explosion-proof and CE Report


80GHz Anti-crossion Radar Level Transmitter Design Features


1.Good transient performance: Based on the self-developed CMOS millimeter-wave RF chip, to achieve a more compact RF structure, higher noise-signal ratio.

2.The 5GHz working bandwidth makes the product have a higher measurement resolution ratio and measurement accuracy

3.Low energy: millimeter wave photon energy has only a few millielectron volt, there will be no X-ray ionization and destruction of the substance to be detected, so it is not easy to destroy the substance to be detected

4.Strong penetration: Strong penetration for non-polar substances. Many nonmetallic nonpolar materials absorb less rays in this band and, therefore, can be used to probe the internal structure of the material. For example, ceramics / cardboard / plastic products / foam are transparent to this band of electromagnetic radiation, and can also be used for airport / station safety monitoring, such as exploring machinery / explosives and drugs, or for circuit board welding detection.

5.Easy to be absorbed by polar molecules: this band has less scattering in non-homogeneous substances, and can detect and measure the water vapor content. You can also study the material composition or conduct quality control by analyzing their characteristic profiles.

6.Large measuring range, small blind area. The maximum range can reach 150m, and the blind area can reach 8cm.


80GHz Anti-crossion Radar Level Transmitter Typical Applications

1. Suitable for the measurement of narrow space or guided wave tube

2. Applicable to super large tank (120m) and small tank

3. High-precision, high-hygiene grade of measurement

4. Occasions with complex process conditions (mixing, heating Rod, ladder, floating roof, strong dust, strong steam, etc.)


80GHz Anti-crossion Radar Level Transmitter Technical Parameters


Typical application

1.The electromagnetic wave emission Angle is less than 3 degrees, suitable for narrow space or waveguide tube measurement;

2.Suitable for large tanks (150m) and small tanks (small blind area);

3.High precision and high sanitary level measurement;

4.Occasions with complex process conditions (mixing, heating rod, ladder, floating roof, strong dust, strong steam, etc.)

Transmission frequency76Hz-81Hz, FM scanning frequency width 5GHz
Antenna formLens antenna, antiseptic lens antenna
Antenna materialPTFE, 304+PTFE
Measuring range0.08-150m
Measuring accuracy0.05%-0.1% F.S
Power supply24VDC, 220VAC
Signal output4...20mA/HART/RS485/Modbus...
Process temperature-40~+130℃,-40~+260℃ (≥260℃ can be customized)
Process pressure-0.1~2.0MPa
Process connectionThread, Flange, Sanitary clamp (optional)
Protection ClassIP67, IP68 (optional)
Explosion-proof gradeExia II CT6 Ga, Exd II CT6 Gb

Note: Products can be customized according to the specific requirements of users.


80GHz Anti-crossion Radar Level Transmitter Pictures



China Factory 80GHz Aiti-crossion Radar Level Transmitter for Continuous Level Measurement with Explosion-proof and CE Report supplier

Factory 80GHz Aiti-crossion Radar Level Transmitter for Continuous Level Measurement with Explosion-proof and CE Report

Inquiry Cart 0