Nyrd702 100mhz Radar Level Transmitter IP68 40 Bar Microwave Level Transmitter

NYRD702 ( Stainless Steel )1.8GHz Guided Wave Radar Level Meter

The guided wave radar level meter is a level meter based on the principle of time domain reflection (TDR). The electromagnetic pulse of the radar level gauge propagates along the steel cable or probe at the speed of light. Part of the pulse of the level meter is reflected to form an echo and return to the pulse transmitter along the same path. The distance between the transmitter and the surface of the measured medium is proportional to the propagation time of the pulse during that period, and the liquid level height is calculated.

Radar Level Meter Technical Parameter

※ Note: Products can be customized according to the specific requirements of users!

Radar Level Meter Operating Principle

Guided Wave Radar is the kind of measuring instrument that is based on the principle of time travel. The radar wave travels at the speed of light, and its running time can be converted into a level signal by the electronic components. The probe emits high-frequency pulses which spread along the cable, and the pulses are reflected back when they encounter the material surface and received by the receiver inside the meter. The distance signal is then converted to the level signal.

Radar Level Meter Installation requirements

Measurement Range

Symbol explanation:

H---- Measurement range

L---- Empty tank distance

B---- The blind area at the top

E---- The minimum distance between the probe and the tank wall

The blind area refers to the minimum distance between the highest level of the material surface and the measurement reference point.

The bottom blind area refers to the distance near the cable bottom that cannot be precisely measured.

The effective distance is the one between the top blind area and the bottom blind area.

Note:Only when the material level is at between the top and bottom blind areas can a reliable measurement of the material level be guaranteed.

Installation Guide

The installation guide below applies to cable and rod probes for measuring solid particles and liquids. Coaxial tubular probes are only suitable for liquid objects.

Installation position:

• Stay away from exports and imports.
• For metal and plastic cans, the meter shall not touch the inner wall of the tank. If metal tank, level gauge should not be installed in the center of the tank.
• Installation is recommended at 1/4 of the diameter of the silo.
• Cable type or bar type probe and tank wall distance should be not less than 30 cm.
• The bottom of the probe is about 30mm from the bottom of the tank.
• The distance between the probe and the obstacles in the tank is not less than 200mm.
• Sensor can be installed in the center of the roof, if the bottom of the container for cone, can measure in the tank bottom.
• The diagram on the right shows the rod-shaped radar installation, which is mainly used for liquid level measurement.

Company Introduction

Xi'an Dehou Electronic Technology Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions.

At present, the company has obtained more than 100 patents and more than 20 soft patents. It has passed IS09001 quality management, IS014001 environmental management, IS045001 Occupational Health and safety management, Occupational Health and Safety Management, GBT29490 Intellectual Property Management, military standard, information security and other system certification and EU CE certification, Russian EAC certification, ATEX explosion-proof certification and SIL certification and other qualifications.

The company is committed to the system integration of process measurement, control, management and other aspects of the system and the development, development, production, sales and service of intelligent instruments and instruments of the Internet of Things.At present, it has metering level FM radar level, pulse radar level, radio frequency guide level, liquid level of magnetover, magnetoexpansion level, sound fork density (level), pressure, flow, multi-point thermometer, analysis, system and tank area meter.The products are widely used in petrochemical industry, coal chemical industry, metallurgy, electric power, building materials, food and medicine and environmental protection water treatment and other industries.

The company can provide customers with location, pressure, temperature, flow, measurement requirements of analytical instruments and cooperation of the Internet of T scheme.