12-20mm Polypropylene Mesh Fiber Improves The Quality And Strength Of Concrete Engineering

12-20mm Polypropylene Mesh Fiber Improves The Quality And Strength Of Concrete Engineering

Instruction:

StrongCrete PP Mesh Fiber is made of 100% virgin homopolymer polypropylene as raw material, through extrusion, stretching, netting, surface modification treatment, short cutting and other processes. The appearance of pp mesh fibers is a network structure formed by the intersection of multiple filaments, When the pp mesh fibers are put into concrete the reticulated fibers are extruded and torn into single wires with hooks at both ends and are interwined and distributed in many directions which enhances the bonding force between the fibers and concrete.

A large number of pp mesh fibers are distributed in concrete in three-dimentional form which provides reticulate supporting effect, fundamentally changes the crack resistance, impact resistance, fatigue resistance and wear resistance of concrete, greatly improves the toughness and deformation ability of concrete and thus greatly improves the quality of concrete engineering.

1. Length : The commonly used pp mesh fiber length in concrete is 20mm, and the commonly used pp mesh fiber length in shotcrete is 10mm

2. Ratio Design: Usually the fiber content of concrete is 0.9kg/m3, the fiber content of bridge waterproof layer is required to be 1.35-1.8kg/m3, the tunnel spray concrete is the same, and other materials remain unchanged. Among a series of active composite materials such as silica fume, pulverized coal, grinding slag, zeolite powder and fiber, fiber has a relatively good effect on concrete.

4. Mixing Process:Crushed stones, fibers and sands will be put into the mixer in turn. After two minutes of mixing, the fiber is fully developed, and then add cement and water, and stir normally. The material can be put in as usual, but the mixing time should be appropriately extended to allow the PP Mesh Fiber to be fully mixed.

5. Stirring Time: Usually 2-3 minutes after adding PP Fiber Mesh Form, the purpose is to make the fiber fully spread into monofilament or net fully spread, thus enhancing the strength of the concrete.

Function:

Specifications:

Application:

1.PP mesh fiber for concrete reinforcement

2.PP mesh fiber for mortar reinforcement

3.PP mesh fiber for anti-cracking resistance

Packing:

1kg net each PE bag, 10kgs per plastic woven bag

Certification:

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry.

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded.

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.