Lightweight Adhesive Copolyester Fusible Bonding Web And Stabilizer

PES hot melt web BWPES105

The BWPES-105 hot melt web is a non-woven hot melt adhesive that can be easily or continuously operated.This product can be widely used in various types of fabrics, paper, polymer materials and metals. The weight per square meter is from 8-120 grams.

Typical use

Component: Copolyester

1. Clothing industry fabric bonding

2. Adhesive foam and sheet bonding for the automotive industry

3. Indoor product fabric bonding

4. Multi-layer bonding of filter materials

5. Luggage industrial fabric bonding

6. architectural decorative fabric bonding

Physical and chemical properties

Application characteristics

1. Strong bonding ability and washing ability

2. High molecular strength, not easy to plasticize and deform

3. High bonding strength to fabrics and foams

4. good air permeability, not easy to aging and yellow

Precautions

If you accidentally touch your eyes, rinse immediately with water and seek medical attention if you are serious.

If you accidentally touch the skin, rinse with water.

It is recommended to use in a well ventilated area.

Product specifications

Weight 25g, or customized according to customer requirements.

Reference usage

1. Hot melt adhesives require hot pressing bonding.

2. If it is a combination of two thin flexible materials, the material 1 / hot melt adhesive film / material 2, stacked together, using a flat press or flat laminating machine, hot pressing bonding, reference temperature125- 150 ° C, pressure 0.2 MPa, time 12 seconds, the specific pressing conditions need to be adjusted according to customer's actual conditions.

3. If it is a thick and rigid material, the hot melt adhesive can be placed on the surface of the thick rigid material and baked together in an oven at 150 ° C. After the hot melt adhesive film is completely melted, the two materials are bonded. Together, the baking temperature can be adjusted

according to the customer's actual situation.

4. Thinner rigid materials can also be pressed with a flat press, such as a thin aluminum plate and a non-woven fabric.

Transportation and storage

Hot-melt adhesives are non-hazardous materials. They should be handled gently during transportation to prevent exposure to sunlight, rain, heat and heavy pressure.

The product should be stored in a cool, ventilated, dry place, protected from sunlight, rain, high temperature, etc., and the height of the stack should not exceed 3 layers. The storage environment should be stored in a cool and dry place at 0-30 °C.

Storage period: 1 year from the date of production.

Packing image:

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry.

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded.

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.