Add to Cart
Briture PP Fiber 110F is made of 100% virgin homopolymer polypropylene with form of monofilament type, it is mainly used for concrete and motar reinforcement, anti-cracking.
Resist to shrink & crack Increase seepage resistance Increase
friction resistance
Increase freezing & thawing resistance Improve tendons
protection Replace steel net (using in plastering)
Prevent mortar split and crackle expansion Increase impact
resistance and peeling resistance
A. Easy to be dispersed in mortar or concrete and no agglomeration,
it can guarantee the property of crack resistance effectively
B. Easy to be used: No need to change the proportion of mortar,
just put the fibers into the mortar mixture and stir for a moment
after adding water.
C. It with fine economic property: The equivalent diameter of fiber
is only p 0.03mm, so the ratio of diameter and surface area is high
and on the basis of crackresistance, it can reduce the amount (to
about 0.6kg/m3 ).
D. Easy to plaster: As the great number of thin fibers spread into
mortar evenly, the plastering is much easily and this can improve
the binding strength between surface and base.
E. It with stable chemical property, strong acid &alkali
resistance, and can be used in any engineering projects.
1. Be suitable for the water–proof layer, floor, inner & outer
wall of industrial and civil construction.
2. Increase cracking resistance on the surface of industrial
workshop, warehouse and parking lot.
3. Increase cracking & seepage resistance of the ground in
natatorium, swimming pool, pond and ditch.
4. Be suitable for any mortar projects and fine aggregate concrete
projects.
Raw material | 100% virgin PP |
Crack Elongation | 15-20% |
Diameter | 25+/-5 microns |
Melting Point | 160-170 |
Tensile Strength | > 450Mpa |
Length | 6mm, 12mm, 18mm... |
Acid & Alkali Resistance | strong |
Density | 0.91 |
Fiber Type | Monofilament |
Packing | 600g, 900g, 1kg |
1kg each PE bag, 10kgs each woven bag/small paper bag of 600g, 900g or 1000g each and then 15kgs or 21kgs each box