3g Blue Color Pit And Fissure Sealant For Children Oral Health

3g BLUE Color Pit And Fissure Sealant For Children Oral Health

Product Information:

【Instructions】

1. Clean the tooth surface: install a small brush on the low-speed mobile phone, thoroughly clean the pits and grooves on the tooth surface that are to be sealed, and then rinse fully with a water gun. After cleaning the tooth surface, use cotton gauze balls to prevent moisture, dry the tooth surface and keep it dry.
2. Acid etching, rinsing and drying: It is recommended to use phosphoric acid gel with a phosphoric acid content of not less than 35% for acid etching. The etching time of permanent teeth is generally 20-30 seconds, and that of deciduous teeth is 60 seconds. Be careful not to wipe the etched tooth surface during the etching process, because this will damage the etched enamel surface and reduce the bonding force.
3. Apply sealant: Unscrew the sealing cap of the pit and fissure sealant, install a dental flushing needle or a dental delivery head, gently push the push rod of the conveyor, and directly apply the pit and fissure sealant to the pit and fissure. When applying pit and fissure sealant, attention should be paid to the discharge of air bubbles, and the coverage of the sealant should be smaller than that of the acid-etched surface, and it should be as thick as possible without affecting the occlusion. Sometimes it may be high, but it can be worn off after 2-3 days. If the coating is too thin, it will lack sufficient compressive strength and be easily crushed.
4. Curing: After coating, irradiate the pit and fissure sealant with a light curing machine (lamp) for 20-40 s. The wavelength of the light curing machine (lamp) should cover 420-480 nm, and the irradiance (light intensity) should not Less than 1000 mw/cm2, those with large area should be irradiated in stages. This product does not flow after curing, and forms a thin, hard milky white film on the tooth surface, which is easy to observe.
5. Inspection: After the sealant is cured, conduct a comprehensive inspection with a probe. Check for degree of cure, adhesion, presence of air bubbles, look for missing or unsealed fissures and reseal. Observe whether there is too much sealing material and whether it needs to be removed. If any problem is found, it should be dealt with in time; check the occlusal relationship, and adjust the grinding if the sealing agent is too thick.

Company Profiles:

Chengdu I-ReHealth Medical Devices Co., Ltd is a high-tech R&D and manufacturing company focusing on the oral health field (medical materials and medical devices). Founded in 2016, it is located in the beautiful "Tianfu Kingdom"-Chengdu.

Based on the dental industry, I-ReHealth develops a strategic layout and is committed to providing customers with high-quality oral medical solutions. The company has formed a long-term and in-depth cooperation relationship with the West China Hospital of Stomatology.

FAQ:

1.How can I get the price?

Introduction

For over 8 years , Chengdu, Sichuan Province, China based I-ReHealth Medical Devices Co., Ltd always want to be one of the leading international manufacturers of dental materials. With our intensive research and development efforts in the Fluoride and other dental materials, I-ReHealth Medical Devices Co., Ltd will continues to set new products in the development of innovative dental materials products to improve dental care throughout the world.

We has a 100,000-level purification production workshop that meets GMP standards, and has advanced production and testing equipment. At the same time, it has also built a sterile room, a positive bacteria room, and a physical and chemical testing room, with international cutting-edge R&D and production transformation capabilities.