Multiple Protocol IoT Wired Trailer Gps Tracker With Internal Rehargeable Battery

NT36AE AGPS GPS LBS car position multiple protocol position module alarm hot sales GPS device

● MT36 is a special positioning product

● Can switch between wired and wireless

● Built-in 5200mAh polymer lithium battery, real-time positioning is used when wiring.

● Support satellite positioning, AGPS positioning, base station positioning, etc.

● Communication support: GSM and GPRS.

● Expansion interface, can access tire pressure sensor,temperature sensor, load sensor, door sensor, pressure switch, etc.

● Support remote firmware upgrade.

● Support multiple protocols, compatible with multiple standard platforms.

● IP68 highest waterproof.

2.1 Main parameter

2.2 Product configuration

3.1 Basic Functions

3.1.1 Location monitoring

Including timing return, blind zone compensation, speed and mileage statistics, area monitoring and other functions,The system issues positioning instructions, and the terminal returns data including longitude, latitude, speed, direction, and status information.

3.1.2 Time monitoring

The vehicle GPS terminal can be set to upload the position and status information of the vehicle to the backend at a certain time or a certain period or at a certain time interval.

3.1.3 Blind spot compensation

When the terminal enters the GPRS blind zone, the track data will be saved at the shortest 15S interval, and the blind zone data will be uploaded to the backend when the GPRS is back online. The blind zone compensation data can be saved up to 4000.

3.1.4 Cornering Compensation

When the vehicle enters the curve lane, the terminal detects that the driving direction has a certain angular deviation (default 20 degrees), and a timing feedback message is added to ensure that the driving track is more accurate.

3.1.5 LBS

The terminal uses GPS positioning by default. When the GPS enters the blind zone and cannot be accurately located, the terminal automatically switches to the base station location. The terminal acquires the base station information every 30S and uploads the base station information, the server interprets the specific location.

3.1.6 Main power detection

The terminal detects the main power voltage in real time. When the battery voltage on the vehicle is too low, the vehicle terminal reports a low voltage alarm to the monitoring center.

3.1.7 Over speed alarm

When the vehicle speed is higher than the over speed alarm value, the vehicle-mounted terminal will notify the monitoring center.

3.1.8 Main power failure alarm

When the main battery of the vehicle is damaged or cannot supply power, the built-in backup power supply can keep the system working and send a power failure alarm to the monitoring center.

3.1.9 Built-in battery

The terminal has a built-in large-capacity high-temperature lithium battery, which can detect the battery power in real time and report the battery power in real time. When the built-in battery is working, the terminal has a variety of working states, which can support the terminal to work continuously for no less than 7 days.

3.1.10 Fast charge

The terminal has a fast charging function. When the main power has power, the built-in battery can be quickly charged through the fast charging module.

3.1.11 Power saving function

The terminal has a built-in G-Sensor, which can automatically detect the current state of the device and distinguish between sports mode and static mode; when the terminal is in static mode for a period of time, the terminal can automatically enter the power saving mode, and the uploaded data will be converted to heartbeat feedback; After the G-Sensor detects that it enters the sports mode in real time, the terminal immediately exits the power saving mode and enters the normal working state.

3.1.12 Intelligent self-check

The vehicle-mounted terminal can perform self-diagnosis. Once a fault occurs, it will send a fault notification to the center, such as GPS, GSM, etc., and can automatically take relevant measures. The monitoring center can also query the terminal's current model, version, configuration, operating status, and equipment functions.

3.1.13 Remote setting

Remotely set various parameters of the terminal through the central system, including IP, central number, various monitoring parameters, etc.

Shenzhen Kingwo IoT Ltd (Hereby referred as “Kingwo”) is a high tech company focus on IoT technology, we develop and sell GPS tracking products based on 4G ,3G and 2G network technology, our products include disposable and rechargeable asset GPS trackers, vehicle GPS trackers which are for basic tracking as well as extended accessories and personal GPS tracker for personal monitor, SOS alert , fall detection, our hardware have been widely used in trailer tracking, RV's tracking, container tracking , vehicle tracking and outdoors workers tracking,it brings security confidence for assets owners, fleet owners and companies which needs improve management efficiency , Kingwo is also very professional in OEM &ODM products, till now Kingwo's products have been exported to more than 80 countries and we have sold around 3 million units both in domestic and overseas market, Kingwo also has our own software platform which is called “iTrack Sense”, it has like live tracking, history trace check, rich reports and other features that can be customized.