Ultrasonic Portable Electronic Whiteboard With USB Cable / Wireless Dongle

Portable ultrasonic electronic whiteboard

Product Composition
interactive Stylus
Stylus tips
Key l Left mouse button
Key 2 Right mouse button
EWB Sensor:
EWB Sensor can be placed in any position around the writing board .
Calibration operation is required after first use or change of installation position
Internal batteries are charged by connecting a USB able to a computer or to a power adapter .
Wireless Dongle:
Connect computer USB interface to receive data sent by EWB Sensor
Power Adapter
Charging EWB sensor internal batteries , if charged with computer USB interface , no need for this accessories( Package without Power Adapter )

connectivity
usb cable or wireless dongle
specifiations
interactive Stylus
Battery:1 AA 1 , 5V battery or 1 AA 1.2V rechargeable battery or I AA 3 . 6V rechargeable battery
Battery life : 30-60 hours
Dimensions : 152mm * 25mm
weight:50g
EWB Sensor
PC Systems : Windows , MAC,Linux,Android,Chrome OS
work area:3m*1.5m
Power : USB or Internal battery
Battery life : 3 hour charge time for 5 hours
Dimensions : 227mm * 43mm*11mm
weight:85g
Power Consumptions : 0 . 5W
Tracking Technology : Ultrasound
Wireless Technology:BT
Wireless Power : < 10mw
Operating Temperature : 10C--35C
Wireless Dongle :
PC Systems : Windows , MAC , Linux , Android , Chrome OS
Wireless Power : < 10mw
Power Adapter:
INPUT : AC100-240V . 50 / 60HZ , 0 . 5A
OUPUT:DV 5V ≥500mA

Operation
Tun on
Long press power sign in upper left corner ,turn on
Tun off
On-state , Press the power sign in the upperleft corner to turn off
(automatically shut doan after 30 minutes of noperation )
Calibration
when the position of EAB Sensor , the position andarea of pro jector change for the first timcalibration operation is needed .

Turn EWB Sensor on and connect to the computer via USB or wireless
Press the Stylus key2 for more than 3 seconds in a 2 cm radius semicircle near the center of the EWB Sensor front end . Hear a buzzer sound and indicate to enter the calibration mode . Meanwhile , the pointer on the screen jumps to the position of the first calibration point .
As shown in the projection screen above , the point pointed by the arrow is the position of the calibration point . Click on the calibration point with the tip of the stylus . If the current calibration point succeeds , a click will be heard .At the same time , the pointer jumps to the next calibration point . When all nine calibration points pass , three clicks will be heard to indicate the success of calibration

If the calibration operation is wrong . please hold down the key l of the stylus for more than 2 seconds hear two short sounds , and exit the calibration mode at the same time
In the calibration mode , if there is no operating stylus for more than 30 seconds . two short sounds are heard and the calibration node is automatically

Indicator status light
Light off : Power off
Red light : Wireless connecte
Red light Flashing : Low battery
Green light : Normal writing
Green light Flashing : Battery Charging
Orange light : Not connected to PC
Package Contents
I Interactive Stylus
I EWB Sensor
I Wireless Dongles
I USB Cable for Charge
I Mounting plates
I Adhesives strips
5 Stylus tip

Shenzhen Flyin Technology Co., Limited is a modern high-tech enterprise . Integrating with the product development, production and sales. Our company was founded in Dec. 2013, and the FLYIN brand was successfully registered in the same year as well. In December 2013, our company established his own factory in Shenzhen, Guangdong. Based on the trend of times and the demand of customers, our company focuses on the innovation and development of core technologies, so that already independently developed 3LCD display technology with laser light source series projectors and DLP Display technology with Led Light source series projectors .