V-Sol 4FE EPON ONU Optical Network Unit Reserve POE V2810E-PD
Brand Name:V-solution
Model Number:V2810E-4PD
Minimum Order Quantity:1 pcs
Delivery Time:3-5 days
Payment Terms:Negotiable
Place of Origin:Guangdong, China
Contact Now
Add to Cart
Active Member
Location:
Guangzhou China
Address:
Room 1101,Originality Building B3, NO.162 Science Avenue,Science Town,GuangZhou
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
V-Sol EPON ONU Reverse Poe Onu With 1EPON + 4FE + Reserve POE
Product Description
V2810E-PD EPON Reverse PoE(PD) ONU with reverse PoE is designed for fulfilling FTTH request of telecom operators, internet access of SOHO. This product is support EPON model or GPON model, which has high performance/price ratio, and the technology of layer 2 Ethernet switch as well.
It is also fully compliant to technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1) from China Telecom, Its GPON model is fully compliant to ITU-TG.984.x. ONU is powered by the power sourcing equipment (PSE) deployed in users' residences, applied in scenarios where there is no alternating current (AC) power supply in corridors.
4xFE Reverse PoE EPON ONU
Key Features
- Support Strict,Weighted,or mixed mode QoS.
- Integrated 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
- Support port monitoring, port mirroring, port rate limiting, port SLA, etc.
- Support auto polarity detection of Ethernet ports (AUTO MDIX).
- Support layer 2 Policy Control
- Support IPv4 IGMP snooping and IPv6 MLD snooping
- Shared 1Mbit on-chip memory-based switch fabric with true non-blocking switching performance.
- 8K MAC address entries with automatic learning and aging.
- Per port programmable MAC address limiting.
- 802.1Q VLAN support for the full 4,096 VLAN IDs.
- Quality of Service support with four traffic classes..
Application
Specifications
| LED | Mark | Status | Description |
| Power | PWR | On | The device is powered up. |
| Off | The device is powered down. | ||
| Optical signal loss | LOS | Blink | Device does not receive optical signals. |
| Off | Device has received optical signal. | ||
| Registration | REG | On | The device is registered to the PON system. |
| Off | Device is not registered to the PON system. | ||
| Blink | Device registration is incorrect. | ||
| Fast Blink | Port is sending or/and receiving data. | ||
| Interface | LINK/ACT | On | Port is connected properly . |
| Off | Port connection exception or not connected. | ||
| Blink | Port is sending or/and receiving data. | ||
| Powered Device | POE | On | Device Powered by the PSE. |
| Off | Device Powered by the DC. | ||
| System | SYS | On / Off | System is not running or fatal error |
| Blink | Normal running |
Interface Description
| Port Type | Function |
| PON | Connect PON port with internet by SC/UPC type, single mode optical fiber cable. |
| LAN 1/2/3/4 | Connect device with ethernet port by RJ45 cat5 cable. |
| POE | Connect power sourcing equipment (PSE). |
| RST | Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings. |
| DC12V | Connect with power adapter. |
V-Sol 4FE EPON ONU Optical Network Unit Reserve POE V2810E-PD
Inquiry Cart
0